Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Home Additions & ADU: The Glendale Owner’s Guide
Techo-Bloc is a hardscape and masonry brand, so a “Techo-Bloc home addition or ADU” in practice means the addition’s hardscape package: paver patios, walkways, seat walls, retaining walls, steps, and driveway aprons built with Techo-Bloc units. In Glendale, an addition or ADU build runs $45,000 – $130,000 for the structure, and the Techo-Bloc exterior work usually lands inside that number when it’s scoped up front. If the wall is bulging, the patio is settling near the house, or your ABU (accessory building unit) permit drawings show hardscape that hasn’t been built to match, you’ll know a part or footing gave out long before you see a crack in the slab.
Which Techo-Bloc Models This Applies To
Techo-Bloc doesn’t make one “part” for an addition. It makes systems, and matching the right one is where most of the trouble starts. The wall block lines that show up in Glendale addition work are the retaining and freestanding series (the older and current AB/AB Collection family, plus the newer structural wall systems), and the paver side is where you’ll see the Inka, Blu, and similar plank-style and textured units on patios, walkways, and step treads. Identify what you have by pulling one cap unit or edge paver and reading the mold marks and stamped dimensions on the underside, not by eye. Glendale’s building code under the current CBC requires retaining walls over a certain height to be engineered and permitted, and the cap and coping units are what reveal how tall the wall was designed to be. On the OEM question: Techo-Bloc caps, coping, and edge restraints are proprietary to their series, so a generic cap that looks close will fit wrong and hold water. Structural units and caps should match the original system; the base course and drainage aggregate can be quality aftermarket stone, and that’s fine. Barrett & Sons Construction Glendale is an independent builder and is not affiliated with Techo-Bloc.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Home Additions & ADU Is Failing
- Bulging or leaning retaining wall. The wall is pushing out because the base wasn’t compacted to spec or the drainage behind it clogged, and that soil pressure has nowhere to go but through the face.
- Cap and coping units lifting or rocking. A failing cap means the adhesive bond broke or water got in under the cap, froze-then-expanded in the cold nights we do get here, and popped it loose.
- Patio sinking against the house slab. Base failure at the edge closest to the addition, a common sight when the transition strip was undersized or missing and water pools there.
- Step treads cracking at the joint. Cracking usually traces to a thin or unconsolidated base under the tread rather than the paver itself, especially where foot traffic concentrates.
- Grout or polymeric sand washing out after rain. Failed joint fill points to missing edge restraint or drainage pitch running back toward the house instead of away from it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Glendale, a Techo-Bloc hardscape repair or partial rebuild for an addition or ADU sits inside these ranges:
| Scope | Installed range |
|---|---|
| Home addition (structure, before hardscape) | $45,000 – $130,000 |
| ADU construction (structure, before hardscape) | $90,000 – $220,000 |
| Paver patio installation | $3,500 – $11,000 |
| Paver driveway installation | $7,000 – $18,000 |
What moves the number: wall height and whether an engineer’s stamp is required, how much base and drainage has to be excavated and replaced, and the series the cap and coping units come from. Every scope, allowance, and price change arrives as a written change order before a single nail or paver moves. The work is backed by our written 90-Day Done Right Promise: if it’s not right, we come back and make it right on one call.
DIY or Call Us?
You can safely check a few things yourself: pull one loose cap to read its mold marks and dimensions, note where water pools after rain, and photograph the bulge or crack with a tape measure for scale. What you shouldn’t do is rebuild the wall footing or re-set structural units, because a retaining wall over the engineered height holds back thousands of pounds and is a permit-and-inspection item in Glendale, and getting it wrong puts the addition’s slab and the house behind it at risk. That work belongs to a trained crew, and we pull the permit and pass the inspection so the job holds. Our crews have up to 28 years of experience on this. Call (844) 560-4526 for your free estimate on the hardscape portion of any Techo-Bloc addition or ADU.
FAQs
How long should a Techo-Bloc wall or patio last in Glendale? A correctly built Techo-Bloc system should hold for several decades, but that lifespan hinges on compaction and drainage, and a wall with a clogged drain or a shallow base will start moving in just a few years. Call (844) 560-4526 for a free estimate on your specific wall or patio.
Can the failed cap or wall be repaired instead of rebuilt? Often yes. Lifting and rebedding a cap, regrading behind a wall, or removing and resetting a localized section is cheaper than a full rebuild, but only if the base and drainage are still sound, which is what we check first. Call (844) 560-4526 to schedule a free onsite look.
How long does the swap take? A cap and coping reset is typically a day; a partial paver patio or wall section rebuild runs several days depending on access and base repair; the full addition or ADU build runs weeks to months, and we’ll give you a written schedule up front. Call (844) 560-4526 for a free estimate.
How do you source the right Techo-Bloc part? We read the mold marks on a pulled unit and match the exact series and dimension from a verified supplier, not by eye, so the cap and coping fit the original system. We also install KraftMaid, Cambria, and Silestone on the interior half of the same job. Call (844) 560-4526 for a free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.