Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Kitchen Remodeling: The Glendale Owner’s Guide
We install Techo-Bloc-compatible kitchen remodeling in Glendale, and most full kitchen projects here run $14,000 – $45,000 installed. If you’re replacing a failed part on an existing Techo-Bloc surface or counter, expect a written line-item quote with the part, labor, and any substrate repair called out separately.
Owners usually find the problem before they see it. A paver-set countertop starts rocking when you lean on it. A grout joint at the sink goes dark and stays dark. A Techo-Bloc slab face on a peninsula chips at the edge and keeps chipping because a cabinet corner is bearing the load instead of the framing. In Glendale homes built between the 1920s and 1950s, we see this a lot in the older stock around Adams Hill and Chevy Chase, where original cabinets were never built to carry stone. The part didn’t fail on its own. The support under it did.
Which Techo-Bloc Models This Applies To
Techo-Bloc makes modular hardscape and surface products, not traditional kitchen cabinets. So when a Glendale owner says “my Techo-Bloc kitchen is failing,” they almost always mean a Techo-Bloc paver or slab surface being used as a counter, a table, a hearth, or a decorative feature inside a remodeled kitchen. Before we quote anything, we identify the exact line: look for a stamp or label on the underside or a cut edge, and measure the face dimensions to the nearest eighth of an inch. Techo-Bloc face sizes vary by series and by whether it’s the modular or the slab format, and a “close enough” match will show a visible seam against the existing field.
The OEM-versus-aftermarket call matters here. Some Techo-Bloc lines are discontinued or regionally stocked, and an exact-color match may not be available. In that case we tell you plainly, show you the closest current equivalent, and put the color variance in writing before you approve it. We don’t stock parts and we don’t carry Techo-Bloc inventory on a truck – the material is sourced per job. We’re an independent contractor and not affiliated with Techo-Bloc. For the rest of a Glendale kitchen, we also work with KraftMaid cabinetry, Cambria, and Silestone, and we’ll say so once: those brands are looked up before we put them on paper.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Kitchen Remodeling Is Failing
- Rocking or deflection when you lean on it. The surface is spanning an unsupported gap. Under a Techo-Bloc counter or peninsula, that means the cabinet box or framing has moved, not that the stone went bad.
- Dark, widening grout joints near the sink or range. Water is getting behind the surface through a failed seal. Left alone, it reaches the substrate and the adhesive bond gives out.
- Chipped or spalled edges on the face. Usually load transfer at a corner where the cabinet doesn’t meet the slab properly. A chip is the symptom; the bearing point is the cause.
- Cracks running from a cutout (outlet, faucet hole). Stress concentrates at cutouts, and a crack from a cutout in Glendale’s older homes often traces back to a cabinet that was never leveled before the surface went on.
- Uneven color or efflorescence on the face. Moisture is migrating through the material from underneath. In our dry climate this looks like a stain at first, but it’s a moisture path, and it will keep coming back until the source is closed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Techo-Bloc surface replacement inside a Glendale kitchen lands inside our standard kitchen range. Full kitchen remodel in Glendale: $14,000 – $45,000. Small kitchen remodel: $9,000 – $20,000. Cabinet installation, which often has to happen to fix the real cause: $4,000 – $13,000. Countertop installation: $2,000 – $6,500. Backsplash installation: $800 – $2,500. Kitchen island installation: $3,000 – $10,000.
What drives the number: whether the substrate has to be rebuilt, whether the cabinet boxes need leveling or replacement, the size and number of cutouts, and access. We quote the part, the labor, and any substrate repair separately so you can see exactly where the money goes. Every price change comes as a written change order before we touch the job. Every eligible job gets permits pulled and inspections signed. And the whole thing is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
Here’s the honest split. You can safely check the material stamp and measure the face. You can run a finger along a chip and see whether the edge is bearing on the cabinet. You can photograph a crack from the cutout. That’s diagnosis, not repair, and it’s useful.
Where it goes wrong: resetting a stone or paver surface on a kitchen counter is load-bearing work with a real injury risk. A Techo-Bloc face is heavy, it comes off fast and without warning once the bond fails, and it will take fingers or a foot with it. We’ve also seen homeowners re-adhere a slab over a soft substrate and crack it within a season. If a piece is loose, don’t weight it or lean on it, and don’t pry it yourself. Call us and we’ll tell you what to check and what to leave alone. Our crew members have up to 28 years of experience, and a live person answers the phone around the clock.
FAQs
Ten to twenty years is realistic for a properly supported, sealed Techo-Bloc surface in Glendale’s climate. The material handles our dry summers and mild winters well. The failure is almost always the substrate or the cabinet underneath, not the stone. If you’re past year ten and see weather stains or a joint opening, call us for a free look before it cracks.
Sometimes, yes. A single chipped face or a localized grout failure can often be reset and resealed if the substrate is sound and the color match holds. What can’t be repaired is a surface spanning an unsupported gap or a cabinet box that’s moved. We’ll tell you which situation you’re in before you spend a dollar.
A single surface replacement runs one to two days once material is on site and the substrate is sound. A full kitchen remodel in Glendale is a multi-week job, and we put the schedule on the contract. What we won’t do is promise a same-day kitchen remodel. Nobody does that honestly.
We identify the exact Techo-Bloc line and face size, then source the current or closest equivalent and put any color variance in writing. We don’t keep parts in stock, so lead time is quoted per job. Call (844) 560-4526 for a free estimate, and if you already have a written bid from someone else, we’ll second-opinion it at no charge.
If you’re staring at a rocking counter, a chipped edge, or a crack running from an outlet cutout, call (844) 560-4526 to schedule your free estimate in Glendale. We’ll identify the part, quote the replacement in writing, and pull the permits if the job needs them. And if a national outfit already gave you a number, send it over – our free second opinion on any written estimate costs you nothing, and we’ll tell you what the other guy left off the page.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.