Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Glendale Owner’s Guide
We install Therma-Tru windows and doors and handle the parts that fail on them most – entry door slabs, sidelites, multipoint hardware, hinges, sweeps, and glass units. A full Therma-Tru door replacement in Glendale typically runs $4,500 – $15,000 installed depending on the series and door type, and impact-rated units run $8,000 – $25,000. Single parts like a hinge set or door sweep are far less. Most repairs are scheduled within a few days once we’ve confirmed the part.
Owners usually find us after a specific failure. The panel sticks in summer, then won’t latch when the Santa Ana winds dry everything out. A hinge lets go and the door drops a quarter-inch and drags the threshold. The multipoint lock on a Fiber-Classic or Smooth-Star stops throwing smoothly. Or a sealed glass unit clouds up along the bottom edge after a few seasons of sun. That’s the moment the search starts, and we’re the call when you want the right part matched to the model you actually have.
Which Therma-Tru Models This Applies To
Therma-Tru parts don’t swap freely across product lines, and that’s the first thing that trips up a Glendale homeowner ordering online. The company builds in families – Fiber-Classic and Smooth-Star entry doors, the Classic-Craft collection, and the fiberglass and steel slab options underneath – and the hardware, hinging, and glass are often specific to the series and the year it was built. A hinge from a 2010s Smooth-Star won’t necessarily fit a newer Fiber-Classic door, even though both are Therma-Tru.
To find the right part, look for the label on the door’s hinge edge or the top of the slab. It carries the model and series info. If the label is gone, we measure the slab height, width, thickness, and hinge spacing instead. A standard entry door is 36 by 80 inches, but Therma-Tru offers sizes off that grid, and guessing wastes a trip.
On the OEM-versus-aftermarket question: for structural parts like the hinges and the multipoint lock, we use Therma-Tru-compatible OEM-equivalent hardware because the fit and finish hold up. For sweeps, weatherstripping, and screens, quality aftermarket parts work fine and cost less. We’ll tell you which is which before you commit. We’re an independent service provider and not affiliated with Therma-Tru, so we match the part to your door, not the other way around.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Is Failing
- The door drags or won’t latch in summer. Heat and humidity swell the slab and stress the hinges. In Glendale’s inland pockets – Eagle Rock borders, La Crescenta, and the foothill neighborhoods – we see this every July and August. It usually means a worn hinge or a door that needs re-hanging.
- The multipoint lock binds or won’t throw. The lock mechanism or its strike plates have shifted, or the door has settled. A stiff lock you force can crack the gear inside.
- A cloudy or fogged glass unit. That’s a failed seal, and the argon or air between panes has leaked. It can’t be cleared – the sealed unit has to be replaced.
- Daylight or a draft at the edges. Weatherstripping and sweep have flattened out. In dry Glendale air the sweep can crack and drop off, and the gap lets in dust and hot air.
- A hinge pulling loose or the door sagging at the top corner. Repeated slam or a heavy door on small hinges. Left alone, the hinge tears the wood or fiberglass frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers land in Glendale. A full entry door replacement, Therma-Tru slab and all, is typically $4,500 – $15,000 installed. Impact-rated door or window units are $8,000 – $25,000. Standard window replacement runs $4,500 – $15,000. Single-part repairs – a hinge set, a sweep, weatherstripping, or a sealed glass unit swap – are quoted line by line, so you see exactly what the part costs and what the labor costs. No mystery bundle.
What drives the range: the door series, the glass package, whether it’s impact-rated, finish and trim, and whether the frame needs repair before anything goes back on. You get a written line-item quote that separates the part from the labor, with a written change order before any scope change. Every eligible job gets the permits pulled and inspections signed, and the work is backed by our written 90-Day Done Right Promise – if it’s not right, Tom comes back and makes it right, one call. The 10% Senior & Veteran discount applies, and there’s no trip charge inside the county.
DIY or Call Us?
You can safely check a few things yourself. Open and close the door slowly and watch where it binds. Wipe the label on the hinge edge and read the model number. Run a hand along the sweep and weatherstripping for gaps and cracks. Tighten a visible loose hinge screw with a screwdriver – that’s fine.
Where it goes wrong: forcing a multipoint lock that won’t throw can snap the gear inside, and there’s no cheap fix once it does. Replacing a sealed glass unit means handling a heavy, fragile panel that can shatter if it’s set wrong. Re-hanging a sagging door that swings on its hinges is a two-person job with real weight, and a door that falls is a safety problem. On anything structural – hinges, locks, glass – we’d rather you call than get hurt or crack a panel. Reach (844) 560-4526 and we’ll tell you what part you need and what it’ll cost.
FAQs
The door slab itself often lasts 20 years or more. The parts that fail first are the hinges, weatherstripping, sweeps, and sealed glass units – expect those to need attention in the 10-to-15-year range, sooner in sun-exposed foothill locations. Call (844) 560-4526 for an exact quote on replacing any of them – estimates are free.
Often yes. A binding door can sometimes be fixed with hinge adjustment or new hinges rather than a new door. Weatherstripping and sweeps are simple swaps. Failed glass and cracked multipoint gears can’t be repaired – they’re replaced. We’ll tell you honestly which yours is. Call (844) 560-4526 for a free second opinion on any written estimate you’ve already got.
A hinge set, sweep, or weatherstripping is usually a same-visit job. A sealed glass unit takes longer because the part has to be ordered to fit your door. A full door replacement is a scheduled job, typically a day or more. Call (844) 560-4526 to schedule your free estimate and we’ll give you a real timeline.
We match the part to your door’s model label or measurements and order the correct one to fit your Therma-Tru series. We don’t stock parts and don’t carry them on a truck – we order what your door actually needs, which is why getting the model right matters. Call (844) 560-4526 and we’ll sort out the match. We also service KraftMaid, Cambria, and Silestone products if you’re working on the rest of the house.
If your Therma-Tru door is dragging, a lock won’t throw, or the glass has gone cloudy, don’t wait for it to get worse. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. A live person answers the phone, day or night. We’ll match the part to your door, quote it line by line in writing, and stand behind the work with our 90-Day Done Right Promise. Tom’s name, address, and license number are published – look them up before you sign anything.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.