Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Glendale Owner’s Guide
If you’re pricing Unilock kitchen remodeling in Glendale, plan on $14,000 – $45,000 installed, with most of that tied to cabinet layout, counters, and the wall prep behind them. We’re an independent contractor, not affiliated with Unilock, and we install their systems alongside KraftMaid and Cambria when the plan calls for it. Whether a job runs three weeks or seven depends on how much of the old kitchen has to come apart. Most Glendale owners start with a single failing piece – a cabinet box that’s gone soft, a laminate top peeling at the seams, a drawer front that won’t sit flush – and only then discover the whole run is out of true. That one bad cabinet is usually the tip of something structural, not a cosmetic nuisance.
Which Unilock Models This Applies To
Unilock makes several kitchen lines that overlap in looks but not in dimensions, and that’s where most ordering goes wrong. The cabinet series are the critical match: a door or box pulled from one series rarely fits the carcass of another, and the mounting hardware and shelf spacing change between them. Before anyone measures, find the manufacturer label – usually on the inside of a cabinet door, on the back panel, or under the sink base – and photograph it. If the label is gone, measure the carcass depth and the door thickness; those two numbers narrow the series fast. On the OEM-versus-aftermarket question: if you’re replacing one failing component and want it to match the original exactly, go OEM so the finish and mounting holes line up. If you’re replacing a whole run, quality aftermarket equivalents fit the standard dimensions and cost less. We quote both, in writing, before anything’s ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
Kitchens fail quietly in California. The signs below are the ones we see most in Glendale homes, each pointing to a cause worth understanding before you spend a dollar on parts.
- A cabinet door that won’t stay closed or sits crooked. Usually a failed hinge or a screw that’s stripped out of particleboard – the board behind the hinge has lost its grip, and re-driving the same screw fixes nothing for long.
- A soft or swollen cabinet base. Water from a slow leak under the sink wicks into the box and swells it; by the time you feel it, the panel has to be replaced, not sanded.
- A countertop that’s lifting or peeling at the edge. In laminate, that’s failed adhesive or years of steam from the dishwasher; in solid surface, a crack that started at an overhang with too little support underneath.
- Drawer glides that grind or stick. Worn runners or a box that’s racked out of square because the cabinet carcass behind it has shifted with the floor.
- A backsplash or caulk line that’s cracking away from the wall. Movement in the wall or the counter, and a telltale sign the substrate behind it is loose.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Glendale runs in these ranges. What drives the top of each range is the state of what’s underneath – out-of-square walls, old plumbing, wiring that needs to move – not the material you picked.
| Work | Installed range (Glendale) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Every quote is line-itemed so you see parts and labor separately, and every price change arrives as a written change order before work moves – not a surprise at the end. The work is backed by our written 90-Day Done Right Promise: if it’s not right, Tom comes back and makes it right, one call. Permits are pulled and inspections signed on every eligible job.
DIY or Call Us?
Some of this you can check yourself. Measure the cabinet carcass, photograph the label, tighten a hinge, feel for soft spots and look for water stains under the sink – all safe and useful. Where DIY goes wrong is in the structural part: re-mounting cabinets to old framing, moving plumbing or gas to fit a new layout, and especially anything touching the electrical for a new counter appliance. Gas lines and kitchen wiring are dangerous, and California code is particular about how they’re run behind cabinets. A wrong move there is a real hazard, not a weekend setback. If the scope is bigger than a hinge or a drawer glide, call us at (844) 560-4526 for a free estimate – no trip charge inside the county, and we’ll tell you honestly what’s worth fixing and what’s worth replacing.
FAQs
A well-installed Unilock kitchen box commonly lasts 15 – 25 years, but “well-installed” is doing most of the work. In Glendale, where a lot of homes are on raised foundations and the dry summer air pulls moisture out of wood, cabinets that weren’t anchored plumb and level tend to fail at the joints and hinges first. Call (844) 560-4526 to look at an installed set and see how it’s holding – estimates are free.
Sometimes. A single failed hinge, a stripped screw, or a loose shelf is a repair worth doing, and we’ll tell you so. But a swollen or soft cabinet base can’t be saved sander-and-glue style – the panel has to come out. Call (844) 560-4526 and we’ll tell you which camp you’re in before you spend anything.
Replacing one cabinet or a run of them typically takes one to three days once the parts are in hand, but most of the wait is ordering time. A full kitchen remodel runs three to seven weeks depending on counters and the trades involved. Call (844) 560-4526 for a written schedule once we’ve seen the space.
We identify the series from the label or the carcass measurements, then order the matching OEM part or a quality equivalent that fits the standard dimensions – and we quote both, in writing, before anything’s ordered. There’s no charge for a second opinion on a written estimate you’ve already got. Call (844) 560-4526 and we’ll walk the space with you.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.