A Barrett company - serving Glendale, CA

Unilock Windows & Doors in Glendale, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Windows & Doors: The Glendale Owner’s Guide

We install and service Unilock windows and doors in Glendale, and replacement window projects typically run from $4,500 to $15,000 installed, while impact-rated units land in the $8,000 to $25,000 range. Hardware like rollers, locks, and weather seals usually falls well below that, and an exact number takes a look at your actual unit. Most Glendale owners don’t notice a window or door part failing until a symptom shows up: a slider that suddenly won’t slide, a lock that turns but doesn’t engage, condensation fogging the glass on its own, or a door that won’t stay shut when the Santa Ana winds pick up.

Call (844) 560-4526

Which Unilock Models This Applies To

Unilock builds several window and door lines, and the part you’re holding has to match the exact line and vintage. Sliding patio doors and vinyl-framed windows often share hardware shapes across a product family, but the frame extrusion and hardware channel changed between some production runs. That’s the compatibility gotcha that trips people up: a roller or sash lock that fits an earlier Unilock slider in the same model name may not seat in a slightly later one.

To identify the right part, start with the label. Most Unilock windows and doors carry a manufacturer sticker in a corner of the frame or on the edge of the sash, printing the model line, size, and a production code. If the label is gone, measure the glass opening, the frame depth, and (for doors) the roller track height. Bring the old part with you, in a bag, to any comparison. For Unilock specifically, the OEM-versus-aftermarket call usually comes down to the frame groove and the hardware finish: an OEM roller or lock is a direct fit, while a quality aftermarket match may need a channel adapter or slight shim. We don’t stock parts and we don’t carry them on a truck, but we source the right one against your label and measurements.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Windows & Doors Is Failing

Here’s what a failing window or door part looks like before you pull anything apart, plus what’s usually behind each symptom:

  • A sliding door that drags or jumps the track. Rollers wear flat or pick up grit in the track, and the door starts to grind instead of glide. Worn rollers are the most common failure we see on Unilock sliders.
  • A lock that turns but doesn’t catch. The keepers or the lock cam have shifted or worn, so the latch passes the strike without engaging. That’s a security problem, not just a draft.
  • Condensation between the panes. A failed seal lets moisture into the insulated glass unit, so fog or water beads inside the glass. You can’t wipe that away; the sealed unit has to be replaced.
  • Drafts or daylight at the edges. Weatherstripping and sweeps harden and shrink in the Glendale heat and sun, letting air through at the jambs and sill.
  • A door that sticks or won’t close squarely. The frame has shifted, a hinge has loosened, or a roller has dropped, so the door racks and rubs at a corner instead of seating flush.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Glendale depends on the part and the scope. A hardware swap (rollers, locks, sweeps) is a small, focused job. A window replacement runs $4,500 to $15,000, and an impact window installation runs $8,000 to $25,000, with the range driven by unit count, glass package, and whether the opening needs reframing. We quote parts and labor separately so you can see exactly what the hardware costs and what the install costs, and every price change arrives as a written change order before work happens. The install itself is backed by our 90-Day Done Right Promise, and eligible jobs get permits pulled and inspections signed.

DIY or Call Us?

Some checks are safe for a homeowner: clean and inspect the track, test the lock, look for the label, note where the draft comes from, and wipe condensation to confirm it’s on the inside of the glass. Where DIY goes wrong is replacing a sealed glass unit (it has to be sourced to size and seated correctly, or it leaks and fogs again) and adjusting or replacing door hardware (a misplaced roller or keeper that doesn’t engage is a security gap). Window and door glass work carries a real risk of cuts and falls from a ladder, so we recommend a trained crew for anything beyond inspection. Call (844) 560-4526 and we’ll tell you honestly whether it’s a parts swap or a bigger job.

FAQs

How long do Unilock windows and doors last in Glendale? A quality Unilock window or door typically lasts 20 to 30 years, but the hardware and seals fail sooner. In Glendale’s heat and sun, weatherstripping and rollers often wear out in 8 to 15 years, well before the frame or glass does. Call (844) 560-4526 for an exact assessment.

Can it be repaired instead of replaced? Often yes. Worn rollers, locks, keepers, and sweeps can usually be swapped without replacing the whole window or door, which keeps the cost down. A failed sealed glass unit or a badly shifted frame may need more than a part. We’ll tell you which one you’re facing.

How long does the swap take? A hardware swap on a single slider or door is usually a same-visit job once the right part is sourced, while a full window replacement depends on unit count and reframing. We’ll give you a realistic timeline in writing with the estimate.

How do you source the part? We match the Unilock label and production code to the correct hardware or glass unit, and confirm fit against your measurements before ordering. We don’t stock parts, so the timeline depends on the part, and we’ll tell you that up front. Call (844) 560-4526 to get started.

We’re an independent service provider, not affiliated with Unilock, and we also work with brands like KraftMaid, Cambria, and Silestone across the trades. Call (844) 560-4526 for a free estimate.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch