A Barrett company - serving Glendale, CA

Wellborn Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Roofing: The Glendale Owner’s Guide

If your Wellborn roof system is failing, the fix usually isn’t a whole new roof. It’s matching the right shingle profile, underlayment, or flashing to your existing assembly, pulling the permit, and installing it correctly. In Glendale, most Wellborn roof repairs run $400 – $1,800, while a full replacement with a compatible premium shingle runs $8,000 – $20,000 installed. The catch is compatibility: Wellborn’s profile lines changed over the years, and the wrong shingle won’t lock to your existing courses.

Call (844) 560-4526

Owners usually find out the hard way. A dark stain spreads across a Chevy Chase ceiling after the first real rain. Granules start collecting in the gutter, or a ridge cap lifts in a Santa Ana wind event. By then the leak has been quietly working for months. We match the part, pull the permit, and install it the right way.

Which Wellborn Models This Applies To

Wellborn has sold several shingle and profile lines, and the part that fits yours depends on the series, the shingle profile, and when it was installed. The profile width, exposure, and locking tab dimensions are what matter most. If your roof was installed in the 1990s or early 2000s, it may be an older profile that’s no longer in current production, which means an exact match takes some digging: measuring exposure, checking a lock-tab sample from an untouched section, and matching tone and granule blend.

To identify the right part, start with the manufacturer label on any unused bundle still in the attic, or check the original permit paperwork filed with the City of Glendale. If neither survived, a dead-vertical measurement at the rake edge and a close look at the shingle tab get us most of the way. For Wellborn specifically, the OEM-vs-aftermarket decision comes down to availability: if the exact profile is discontinued, a quality compatible shingle matched on exposure and profile is the honest answer, and we’ll tell you in writing which one we’re installing and why. We install Wellborn-compatible products as an independent contractor and aren’t affiliated with the Wellborn brand.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Roofing Is Failing

  • Ceiling stains and water rings after rain. A leak is already past the underlayment, which points to compromised flashing or a cracked shingle above it, not the ceiling itself.
  • Granule loss in the gutters. Piles of sand-like granules signal a shingle near the end of its life, which in Glendale’s inland heat and sun exposure can happen years sooner than the national average suggests.
  • Curling, cracking, or lifted tabs. Thermal cycling in Glendale’s hot summers and cool nights stresses the shingle’s asphalt, and once the tab lifts it’s a wind-catch waiting to happen.
  • Bald spots or exposed mat. When the granules wear through to the fiberglass core, the shingle is finished. UV light eats the exposed mat fast, so this is a real leak on a timer.
  • Lifted or missing ridge caps and flashing. A failed pipe boot or step flashing is the most common leak source on any roof, and the fix is a small, targeted repair, not a tear-off.

Replacement Cost & What’s Included

Here’s what Wellborn-compatible roofing work actually runs in Glendale. We quote line items, not a lump sum, and any change to the scope arrives in writing before we touch the roof.

Work Installed cost in Glendale
Targeted roof repair (flashing, boot, small patch) $400 – $1,800
Tile roof repair $600 – $2,500
Full roof replacement, compatible premium shingle $8,000 – $20,000
Metal roof installation $15,000 – $40,000

The low end is a small isolated repair. The high end is a full tear-off with new underlayment, deck inspection, ridge vent, and ice-and-water protection at valleys. We pull the permit on every eligible job, and the inspection sign-off is your protection as much as ours. Work is backed by the written 90-Day Done Right Promise, and we also install other premium brands like KraftMaid, Cambria, and Silestone for the interior work that often comes up alongside a roof project.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some things you can check yourself safely. Look at the roof from the ground with binoculars, note the stain locations on your ceiling, and photograph the problem areas. What you shouldn’t do is climb onto a pitched roof in Glendale to pull shingles or patch a leak. Roof work means height, steep pitch, and the real risk of a serious fall, and damaged underlayment or a mis-set flashing that leaks worse than before is a common outcome of a quick patch. That’s not a scare tactic, it’s just the reality of working a story or two up on a slope. If anything looks off, call us. We’ll tell you what’s actually wrong and what it costs before any work starts.

FAQs

Get Your Wellborn Roof Fixed Right

If your roof is showing signs of failure, don’t wait for the next storm. Call (844) 560-4526 to schedule your free estimate. We’ll match the right part, quote it in writing, pull the permit, and stand behind the work with our 90-Day Done Right Promise.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch