Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinets & Countertops in Glendale, CA
New cabinets and countertops in Glendale typically run $6,500 to $16,000 for a standard 10-by-10 kitchen, with the cabinet boxes and doors usually eating 55 to 65 percent of that number and the countertop slab and fabrication covering most of the rest. We install Wellborn and KraftMaid cabinetry alongside Cambria, Silestone, and Caesarstone surfaces, and every job gets a written scope, written allowances, and written change orders before anything is ordered. Call (844) 560-4526 and a live person picks up, day or night.
Barrett & Sons Construction Glendale is owner-operated. Tom Barrett and his sons are on-site most days, which matters more on a cabinet job than on almost anything else we do. Cabinet layout errors show up six weeks later as a gap you can’t hide behind a filler strip. Slab seams show up the day the countertop crew sets the stone. When the person who sold you the job is also the person standing in your kitchen when the template is taken, problems get caught early and in person.
This page covers the cabinets and countertops piece of a larger project. For the full picture, including layout changes, electrical, plumbing, and permits, see our Kitchen Remodeling in Glendale page. If you’re weighing options for the whole house, start at our home page and work from there.
Key Takeaways
- Cabinet and countertop replacement in Glendale runs $6,500 to $16,000 for a typical kitchen; full custom work with stone slabs goes higher.
- Glendale’s older housing stock (much of it built between 1920 and 1960) means out-of-square walls and settled floors are the rule, not the exception. Cabinets need scribing and shimming, and that labor is real.
- Permits are pulled and inspections signed on every eligible job. Cabinet and countertop swaps that move plumbing, gas, or electrical need a permit in Glendale, and we get one.
- Every price change arrives as a written change order before work happens. No surprise invoices.
- Our crew members have up to 28 years of experience, and every completed job is backed by our written 90-Day Done Right Promise.
When You Need Cabinets & Countertops
Most people call us when something has stopped working the way it should. A few of the situations we see most often in Glendale:
- The cabinet boxes are sound but the doors are shot. In the 1950s and 1960s tracts around Adams Hill and Chevy Chase, we regularly find original plywood boxes that are still solid after sixty years, with drawer glides that gave out a decade ago and hinges that no longer hold a door square. Refacing or new doors can save real money here, and we’ll tell you when that’s the honest answer instead of selling a full tear-out.
- The countertop has cracked, chipped, or delaminated. Tile countertops from the 1970s and 1980s are common in Glendale, and grout lines collect everything. When a tile top starts lifting or a laminate top delaminates at the sink, patching rarely holds. That’s usually the moment to talk about stone.
- You’re changing the layout. Taking down a wall, moving the range, adding a peninsula, or opening the kitchen to the dining room. Any of those means new cabinet runs and a countertop templated to the new footprint. This is the scenario where the Kitchen Remodeling in Glendale scope and the cabinet scope have to be planned together, and we do that.
- The kitchen is too dark or the storage doesn’t work. Glendale kitchens built before 1970 often have a single window over the sink and cabinets that stop a foot short of the ceiling. Taller uppers, better interior organization, and a lighter finish can change how the room feels without touching the footprint.
- Water damage under the sink or behind the dishwasher. A slow leak rots the cabinet base before it shows on the floor. We’ve opened base cabinets in Glendale homes and found the bottom panel soft as cardboard. That’s a cabinet replacement whether you were planning one or not.
- You’re getting the house ready to sell or to hand down. Buyers in Glendale look at kitchens first, and a dated kitchen costs you at appraisal. We’ve done plenty of cabinet and countertop refreshes timed to a listing date.
Our Cabinets & Countertops Process
Here’s how a cabinet and countertop job runs with us, start to finish.
- In-home measurement and honest conversation. We measure the actual kitchen, not a sketch. We check wall square, floor level, and where the plumbing and gas stub out. In Glendale homes this step routinely uncovers a wall that’s out of square by an inch or more over eight feet, and we plan for it now instead of discovering it during install. You get a written scope with allowances itemized. An allowance that isn’t on paper is a surprise waiting for a date.
- Product selection with brands you can look up. We walk you through cabinet lines like Wellborn and KraftMaid and stone options from Cambria, Silestone, and Caesarstone. You’ll see door styles, finishes, and slab samples. These aren’t mystery brands off a van. You can look up every one of them yourself.
- Permits and scheduling. If the job touches plumbing, gas, or electrical, we pull the permit and schedule the inspection. The permit inspector works for you, not for us, and we’d rather have him sign off than skip him. Cabinet lead times typically run four to eight weeks depending on the line and finish, and we schedule the tear-out around the delivery date so your kitchen isn’t gutted for a month waiting on boxes.
- Demo and installation. Crew members protect floors and adjoining rooms, remove the old cabinets and countertop, and set the new cabinetry level and scribed to the wall. Background-checked crew members carry the Barrett & Sons name and are uniformed on every visit. If the old countertop is stone and in good shape, we’ll talk about whether it’s worth salvaging for a garage or laundry room before it goes in the dumpster.
- Template, fabrication, and stone install. For stone countertops, a template is taken after the cabinets are set, then the slab is cut and installed. This is the step where a good installer earns their keep, because seams, sink cutouts, and edge profiles are unforgiving. We stay on top of the fabricator’s schedule so you’re not waiting three weeks with plywood counters.
- Final walkthrough and the 90-Day Done Right Promise. We walk the kitchen with you, check every drawer and door, confirm the plumbing and any gas connections, and hand over the written 90-Day Done Right Promise that’s on every contract. If something isn’t right in those 90 days, one call brings Tom back to make it right.
Cabinets & Countertops Pricing in Glendale
Here are honest ranges for Glendale. These are ranges, not quotes, because every kitchen is different. The exact number comes from a free in-home estimate.
| Item | Typical Range | What Moves the Number |
|---|---|---|
| Stock or semi-custom cabinets (10-by-10 kitchen) | $3,500 – $9,000 | Line, door style, finish, box construction, drawer upgrades |
| Custom cabinets | $9,000 – $20,000+ | Custom sizing, inset doors, specialty storage, wood species |
| Laminate countertop | $1,200 – $2,800 | Linear footage, edge profile, backsplash |
| Quartz or engineered stone (Silestone, Caesarstone, Cambria) | $3,000 – $7,500 | Slab selection, square footage, edge profile, sink cutout, seam count |
| Cabinet refacing (doors and drawer fronts only) | $2,500 – $6,000 | Number of doors and drawers, veneer vs. solid, hardware |
| Demo, haul-away, and permit | $400 – $1,200 | Whether plumbing, gas, or electrical moves; dumpster and disposal |
A few things that push Glendale jobs toward the higher end. Older homes mean more scribing and shimming, because nothing is plumb. Second-floor kitchens can complicate delivery and debris removal. And if the layout moves, you’re adding plumbing and electrical labor on top of the cabinets themselves.
We do this with written allowances and written change orders. If the slab you pick costs more than the allowance on the contract, you’ll see the number in writing and approve it before we order. No invoice at the end with charges you didn’t agree to.
We also publish four standing offers you can count on: $40 off any repair over $200, a free second opinion on any written estimate (worth taking us up on if another contractor has already quoted you), no trip charge inside the county, and a permanent 10% senior and veteran discount.
FAQs – Cabinets & Countertops
How much do new cabinets and countertops cost in Glendale?
Most Glendale kitchen cabinet and countertop jobs land between $6,500 and $16,000, with the final number driven by the cabinet line, the stone you choose, and how much the layout changes. A simple semi-custom cabinet swap with quartz counters can come in near the low end; a full custom kitchen with a Cambria slab and a moved sink runs higher. Call (844) 560-4526 for a free in-home estimate, and estimates are free.
Do I need a permit to replace cabinets and countertops in Glendale?
It depends on what moves. Straight replacement of cabinets and countertops in the same footprint usually doesn’t require a permit. But if the job touches plumbing, gas lines, or electrical, or if you’re moving a sink, range, or wall, a permit is required. We pull the permit and schedule the inspection on every eligible job, and that inspection protects you. Call us and we’ll tell you plainly whether your job needs one.
How long does a cabinet and countertop job take in Glendale?
Plan on two to four weeks of active work once the cabinets are delivered, plus the four to eight weeks of lead time before that. Cabinet lead times depend on the line and finish, and stone fabrication adds one to two weeks after the template. The schedule gets tighter when we tear out only after the cabinets arrive, which is exactly how we sequence it. Call (844) 560-4526 and we’ll give you a realistic timeline for your kitchen, not a best-case one.
Should I reface my cabinets or replace them?
Reface if the boxes are solid and square and you’re happy with the layout. Replace if the boxes are damaged, the layout doesn’t work, or the cabinet interiors are falling apart. In Glendale’s older homes we find plenty of sound mid-century boxes worth refacing and plenty of water-damaged bases that need replacing, and we’ll tell you which one you have after we look. Call us for a free estimate and an honest answer.
Can you match a countertop to cabinets I already own?
Yes. We template the existing cabinets and fabricate stone to fit, and we’ll bring slab samples so you can see how the stone reads against your cabinet finish in your own light. Glendale kitchens often have a lot of afternoon sun or a lot of shade depending on the exposure, and stone looks different in each. Call (844) 560-4526 to set up a sample visit.
Ready to Talk Cabinets and Countertops?
If you’re in Glendale and thinking about new cabinets, a stone countertop, or a reface that saves you money, call (844) 560-4526 for a free estimate. A live person answers, 24 hours a day, seven days a week. You can also ask for a free second opinion on any written estimate you’ve already received from another contractor, and we’ll tell you honestly if their number is fair. The 10% senior and veteran discount applies on top of the standing offers, every time.
We serve homeowners across Glendale and the surrounding neighborhoods, and if you’re planning a larger project we’d encourage you to read our Kitchen Remodeling in Glendale page first so you understand how cabinets and countertops fit into the whole job. Every scope, every allowance, and every price change arrives in writing before work starts. That’s the whole promise, and it’s on every contract.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale.