Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Santa Monica
If you’re looking at a fence in Santa Monica that leans after the last wind event, or one the salt air has quietly eaten from the inside out, we can help you figure out what it takes to replace it the right way. We work Santa Monica’s numbered streets, the Ocean Park blocks, and the condo corridors near the beach often enough to know that a fence here isn’t the same job it is two miles inland – the coastal rules and the marine air change what “done right” actually means. Call (844) 560-4526 and we’ll set up a free estimate. We’ll walk the property line with you, tell you what we see, and put the scope in writing before anything gets ordered.
Why Barrett & Sons Construction Glendale Is Santa Monica’s Preferred Fence Installation Company
Barrett & Sons is owner-operated, founded in 1998 and run by Tom Barrett and his sons, which matters when you’re hiring for a fence that has to sit on the right side of the property line and the right side of the city’s coastal rules. Tom publishes his name, his address, and his license number, so you can look him up before you sign anything. Our technicians have up to 28 years of experience, and the crews who work Santa Monica understand the difference between a bungalow lot in the 90404 ZIP and a beach-adjacent multifamily building a few blocks from Palisades Park.
Response time to Santa Monica is straightforward: calls are answered by a live person 24 hours a day, seven days a week, and we schedule estimates quickly because nobody wants a fence question hanging over them for a week. You’ll get a free second opinion on any written estimate you already have, and there’s no trip charge inside the county. Every eligible job gets permits pulled and inspections signed, and any change in scope comes to you as a written change order before we touch the job. That’s the whole point of hiring a local name you can verify instead of a phone quote from a company whose crew you’ll never see again.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Santa Monica
Our Fence Installation team focuses on the three things Santa Monica properties need most: materials that survive the salt air, hardware that isn’t going to corrode in five years, and installation that respects the city’s coastal rules. Here’s how the main options break down.
Wood Fence
Wood is still the most common fence across Santa Monica’s older residential blocks, and it’s also the one that needs the most thought. In the numbered-street bungalows, we specify pressure-treated or naturally rot-resistant wood and hot-dip galvanized or stainless fasteners, because standard galvanized nails on coastal-facing elevations corrode fast enough that the fence can fail before the wood does. A well-built wood privacy fence in Santa Monica runs between $3,500 and $9,000 for a typical residential run, depending on height, gate count, and how much old fence has to come out first.

Chain Link Fence
Chain link still makes sense for a lot of Santa Monica side yards, alley frontage, and the back gates on multifamily properties where budget matters more than looks. The mistake we see is standard galvanized chain link and standard hinges facing the marine layer – within a few years the gate sags and the fabric rusts at the tie-wires. We spec vinyl-coated or heavier galvanized material on coastal-facing runs, and we plan the gate hardware for the wind load it’s actually going to see.

Vinyl Fence
Vinyl has become a popular pick for Santa Monica because it doesn’t rot, doesn’t need painting, and shrugs off the marine humidity that eats wood. The catch is that not all vinyl is built for salt air, and a cheap panel installed on a bluff-edge lot can chalk and fade faster than you’d expect. A typical vinyl fence installation in Santa Monica runs $3,500 – $9,000. We’ll tell you honestly whether vinyl is the right call for your elevation and exposure, or whether a different material makes more sense.

Aluminum Fence
Aluminum is the go-to for a lot of Ocean Park and north-of-Montana properties that want a clean, open look without the rust headaches of steel. Powder-coated aluminum holds up well to salt air, and it pairs nicely with the Spanish Colonial Revival and mid-century architecture that makes up so much of the Santa Monica housing stock. Aluminum fence installation in Santa Monica typically runs $4,000 – $10,000, depending on length, height, and whether the gates are custom-built.
Trusted Brands We Service in Santa Monica
We install fence systems built to last, and we’re happy to work with the brands you’ve already researched. On the window and door side of the trades, our crews handle CGI, CWS, and ECO Window Systems – brands you can look up rather than mystery products off a van. We don’t stock parts, so we won’t promise you a same-day turnaround on materials. What we will do is specify exactly what’s going on the fence, order it by name, and give you the lead time in writing before you commit. If the brand matters to you, it matters to us, and it goes in the scope.
Common Fence Installation Problems We See in Santa Monica Homes
- Salt-air corrosion of standard hardware. Ordinary galvanized nails, hinges, and flashing on coastal-facing elevations fail far sooner than inland hardware, and most standard material warranties won’t cover it. We spec stainless or hot-dip galvanized hardware as a baseline on Santa Monica jobs, not an upgrade.
- Fence height or setback over the Coastal Development Permit limit. A fence that runs taller or further into the setback than the Coastal Zone allows can trigger removal or a costly variance after it’s already installed. We check the limits before the first post goes in.
- Posts set too shallow in liquefaction-prone soil. Near Palisades Park and the bluff-edge lots, shallow-set posts lean and rack within a few Santa Ana wind events. We plan post depth and footing for the actual soil conditions, not a default.
- Marine-layer rot at the pickets and rails. Even a well-built wood fence takes a beating from the humidity that rolls in off the ocean most mornings. Rot-resistant wood and proper drainage at the base make the difference between a fence that lasts and one that’s soft in the rails in a few years.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Santa Monica, CA
Honest fence pricing in Santa Monica comes down to material, length, height, gate count, and what the permit process requires. The lead range for a full fence installation here is $3,500 – $9,000, and the two most common picks break down like this:
| Service | Typical Range in Santa Monica |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
A Coastal Development Permit, custom gates, or extra demolition of an old fence can push the number toward the top of the range. We give a free written estimate with line items, so you can see what’s driving the cost. Any scope change after that comes as a written change order before work continues – no surprise invoice at the end. Call (844) 560-4526 for an exact quote; estimates are free.
Why a Santa Monica Fence Is a Different Job
Here’s the thing a generic fence page won’t tell you: in Santa Monica’s numbered-street bungalows and beach-adjacent multifamily buildings, a fence replacement often requires a Coastal Development Permit if it falls in the Coastal Zone, and the salt air accelerates corrosion of fasteners and flashing – which makes stainless or hot-dip galvanized hardware a permit-level detail, not a nice-to-have. On a typical Santa Monica lot, an old wood fence along a property line is failing not just from age but from salt-air corrosion at the fasteners and marine-layer rot at the pickets, and often the posts are set in soil that’s been disturbed by a prior seismic retrofit. A qualified local fence contractor pulls the permit if one is required, specifies corrosion-resistant hardware and pressure-treated or naturally rot-resistant wood, and coordinates with any existing survey or geotechnical report near bluff-edge or liquefaction zones. The work gets sequenced around inspection sign-off, and any change to height or setback from the original scope triggers a written change order before installation.
That’s the part that catches people off guard. A fence looks like a simple project until the coastal rules and the salt air get involved, and then it’s a small construction job with real sequencing. We plan for it up front so it doesn’t become a problem after the posts are in the ground.
We Also Serve Cities Near Santa Monica
We also work the surrounding Westside communities – Marina del Rey, Culver City, Beverly Hills, and West Hollywood – with the same crews, the same written scope, and the same 90-Day Done Right Promise. If you’re just outside Santa Monica and want a local contractor who knows the coastal rules, we serve those areas too. You can read more about our Fence Installation in Santa Monica coverage and nearby service areas.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Santa Monica
Often yes, if the fence sits in the Coastal Zone and exceeds the city’s height or setback limits – which is most of the beach-adjacent and bluff-side properties. We check the limits on every estimate so you’re not surprised after the fence is up. Call (844) 560-4526 and we’ll walk you through whether your specific lot requires one; estimates are free.
Powder-coated aluminum and quality vinyl hold up best to salt air, and wood installed with stainless or hot-dip galvanized fasteners is a strong option when it’s built right. The hardware matters as much as the material – standard galvanized fasteners corrode fast on coastal-facing elevations. Call (844) 560-4526 for an exact quote on your material choice; estimates are free.
You can, but the coastal permit requirements and the post-depth questions near bluff-edge and liquefaction zones make it risky without local experience. A fence that fails a permit or inspection after installation costs more to fix than hiring it done right the first time. Call (844) 560-4526 for a free estimate so you can compare before you decide; we’ll also give a free second opinion on any written estimate you already have.
A typical residential fence install takes a few days on site, but the real driver in Santa Monica is lead time on materials and, if one is required, the permit review – not the labor. We give you the timeline in writing before you commit, so you know what to plan around. Call (844) 560-4526 to schedule your free estimate.
Vinyl fence installation in Santa Monica runs $3,500 – $9,000 and aluminum runs $4,000 – $10,000, depending on length, height, gate count, and permit requirements. Those ranges are for a full install with old fence removal and line-item scope in writing. Call (844) 560-4526 for an exact quote; estimates are free.
Written by the team at Barrett & Sons Construction Glendale.