A Barrett company - serving Glendale, CA

Kitchen Island Installation in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Kitchen Island Installation in Glendale, CA

Kitchen island installation in Glendale, CA typically costs $4,200 – $9,800 for a built-in island with a stone top, and most projects run two to four days of on-site work once the cabinet arrives. Freestanding islands sit lower, around $1,800 – $3,500, while a large island with a sink, electrical, and a Cambria or Caesarstone slab moves past $12,000. The number depends mostly on size, whether plumbing or wiring has to move, and the countertop material.

We’re Barrett & Sons Construction, and island work is one of the kitchen jobs we do most often in Glendale: bungalows off Adams Hill, mid-century ranch homes in Sparr Heights, and the older houses near Brand Park where the original kitchen was built for one cook and a rolling cart. We pull the permit, set the cabinet, and install the top. You can see the full range of what we handle on our Kitchen Remodeling in Glendale page, and the parent service lives at Kitchen Remodeling. Call (844) 560-4526 for a free estimate.

Key takeaways

  • Freestanding islands: $1,800 – $3,500. Built-in with stone top: $4,200 – $9,800.
  • Islands with a sink or dishwasher need plumbing and a permit; we pull it before work starts.
  • Glendale homes built before 1960 often have galley kitchens with no island footprint – we check clearance before we promise anything.
  • Every price change on your island comes to you as a written change order before any work moves forward.
  • Crews have up to 28 years of experience and get background-checked before they walk onto a job.

When You Need Kitchen Island Installation

An island is not a piece of furniture you slide into a kitchen. It has to fit the room, sit at counter height for the cook, carry the plumbing or electrical you want in it, and be anchored enough that it doesn’t rock when it’s used. If any of the following sound familiar, an island is worth talking about.

  • You have a dead zone in the middle of the kitchen. In a lot of the older Glendale homes around Chevy Chase Canyon and the streets off Verdugo Road, the kitchen is long and narrow with a blank floor where an island would go. We measure the walkway on both sides before we recommend a size – eighteen inches is a squeeze, thirty-six is comfortable.
  • You’re remodeling and the cabinets are already coming out. An island is far easier to set while the floor is open and the old cabinets are gone. Installing one into a finished kitchen is possible, but you pay for patch work and re-finishing that a full remodel would have covered anyway.
  • You want a prep sink or a cooktop in the island. That means moving plumbing or a gas line, which means a permit and inspection. We won’t hide that from you at the estimate – it’s a real part of the cost.
  • The old island is warped, loose, or the countertop is cracking. A settling slab on an unlevel floor will crack at the seam within a season or two. We have replaced several island tops in Glendale where the cabinet itself never sat flat.
  • You need more seating. An island with an overhang on one side turns a kitchen into the place everyone gathers. It needs the right overhang depth – twelve inches for a stool – or the seating is awkward.
  • Your kitchen has no usable landing space near the range. A small island gives you somewhere to set a hot pan. We size it to the room, not to a catalog photo.

Our Kitchen Island Installation Process

Here’s how an island goes from idea to finished kitchen. Every step happens in writing, and you know the price before we start.

  1. Site visit and measurements. We measure the room, note where the plumbing and electrical run, and check the floor level. In older Glendale homes the floor is often out of level by more than a quarter inch across the width of the kitchen – we account for that in the base build.
  2. Written scope and allowance. You get a written scope, the cabinet allowance in writing, and the countertop choice spelled out. If you’re weighing a Wellborn cabinet against another line, the allowance line is where you see the difference in dollars. Your change orders come before work, not after. The allowance that isn’t on paper is a surprise waiting for a date.
  3. Permits and inspections. If the island has a sink, a cooktop, or outlets, we pull the permit and schedule the inspection. The permit inspector works for you, not for me – that’s why we like him.
  4. Cabinet set and countertop template. We set the base cabinet, level it, and template the top for the stone fabricator. Cambria, Silestone, and Caesarstone all template the same way – the cutouts for the sink and any cooktop get measured to the half inch.
  5. Countertop install and finish work. The top goes down, the sink and faucet go in, and any electrical gets connected. We finish trim, toe kick, and hardware and leave the room clean.
  6. Final walkthrough and your 90-Day Done Right Promise. We walk the island with you and check the seams, the doors, the drawers, and the water connections. If anything is off in the first 90 days, one call brings Tom back to make it right.

Kitchen Island Installation Pricing in Glendale

Here are honest ranges. These are what we see on typical Glendale jobs – not the lowest number on a flyer and not the highest one that scares you into doing nothing. Your written estimate is the final word, and it’s free.

Line item Typical range in Glendale
Freestanding island (no plumbing, no electrical) $1,800 – $3,500
Built-in base cabinet island, standard size $4,200 – $9,800
Stone countertop, per square foot installed (Cambria, Silestone, Caesarstone) $65 – $110/sq ft
Prep sink and faucet install (with permit) $650 – $1,400
Electrical for outlets or a cooktop $450 – $1,200
Cabinet hardware and finish trim $150 – $500
Removing an old island $250 – $600

What moves the price: size and shape of the island, whether plumbing or gas has to move, the stone you pick, and how much floor work is needed. A 6-foot island in a finished kitchen is one project; a 9-foot island with a prep sink, a cooktop, and electrical is another. Nobody should quote you a real number over the phone on this one. But nobody should surprise you at the end, either. Every scope, allowance, and price change arrives in writing before it touches the job.

Your free estimate includes a written scope and allowance lines. We also include a free second opinion on any written estimate you already have, and a $40 off any repair over $200 if you have a fix that needs doing alongside the island work. There’s no trip charge inside the county, and a permanent 10% Senior & Veteran discount applies.

Things Homeowners Ask Before We Set an Island

A few practical notes from jobs around Glendale that we’d rather tell you up front.

  • Floor level matters more than you’d think. The kitchens in the 1920s bungalows near Glendale Boulevard were built on joists that have had nearly a hundred years to shift. An island has to sit level even if the floor doesn’t. We shim and scribe the base so the legs and toe kick sit down clean and the countertop is true.
  • Code and clearance. Glendale follows the state building code on walkway clearances around an island. A kitchen that’s tight on space may not pass with the island you have in mind, and we’d rather tell you that at the site visit than after the cabinet is delivered.
  • Ventilation. If you’re putting a cooktop in the island, you need a vent hood over it. That hood has to be vented somewhere – usually up through the ceiling or out a wall. It changes the scope, and it changes the price. We write that in.
  • Standing offers. The four we publish are: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. No other offer is real, so don’t let a phone rep promise you one we haven’t written down.

FAQs – Kitchen Island Installation

How much does kitchen island installation cost in Glendale?

Built-in islands in Glendale typically run $4,200 – $9,800 with a stone top; a freestanding island runs $1,800 – $3,500; a large island with a sink, cooktop, and high-end slab can pass $12,000. The three biggest levers are size, plumbing and electrical, and the countertop material. Call (844) 560-4526 for an exact number – the estimate is free and written.

Does a kitchen island need a permit in Glendale?

Yes, if your island has a sink, a cooktop, new outlets, or moved gas or plumbing, it needs a permit and an inspection. A freestanding island with no utilities generally does not. We pull the permit on every eligible job and schedule the inspection for you. It’s one of the ways we make sure you’re covered when the house changes hands years from now.

How long does an island take to install?

Plan on two to four days of on-site work once the cabinet and countertop are on site, and a bit more if plumbing, gas, or electrical has to move. The countertop has to be templated after the base is set, so there’s a short delay for the stone fabricator – usually about a week. We build that into the schedule up front so you’re not waiting in the dark.

Is it cheaper to repair or replace an existing island?

If the cabinet itself is sound and only the countertop is cracked or the doors sag, repair is usually cheaper – often a few hundred dollars versus a full replacement. If the base is warped, out of level, or the layout doesn’t fit the kitchen, replace it. We’ve done both, and we’ll tell you which one you actually need. Call (844) 560-4526 and we’ll take a look for free.

Can I install an island myself?

A freestanding island that plugs in and doesn’t touch plumbing is a weekend project for a careful homeowner. Anything with a sink, gas cooktop, or new circuits is not – the plumbing, the gas line, and the electrical each carry real risk when they go wrong. We’ll do the work and the permit and the inspection so you’re not the one on a ladder holding a wet connection.

Why Barrett & Sons Construction Glendale

We’re owner-operated, and Tom Barrett and his sons are on-site most days. That’s not a slogan – it’s why you can call the number and get a person, day or night, and why every scope and allowance line gets written down before a nail moves. Every completed island job is covered by the written 90-Day Done Right Promise, and every crew member is background-checked before they walk through your door.

If you want the full picture of what a kitchen remodel can be, start with the Kitchen Remodeling in Glendale page. From there, we can help with related work too: new windows from Andersen or Marvin, a new roof, a fresh driveway, or an addition – call us and we’ll point you to the right crew. We work across Glendale and the surrounding neighborhoods, and we know the housing stock here, from the mid-century ranch homes in Sparr Heights to the older bungalows near Brand Park.

Ready to Talk About Your Island?

Measure your kitchen, snap a photo, and call (844) 560-4526 for a free estimate. We’ll come out, measure the room properly, and hand you a written scope with the allowance lines in it. If you have a written estimate from another company, we’ll give you a free second opinion before you sign anything. Live person on the phone, no voicemail box. We’d rather talk to you sooner than later.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale.

Need Construction help in Glendale? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch