Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Glendale?
Walk-in shower installation in Glendale typically costs between $4,500 and $12,000 for a full tear-out and rebuild, and most single-shower projects land in the $6,000 to $8,500 range. A simple curbless conversion with a prefab pan and tile walls runs near the low end, while a custom-tiled walk-in with a frameless glass enclosure, bench, and new valve trim pushes toward the top. Same-week estimates are free, and we put every line of scope, allowance, and price change in writing before work starts.
We’re Barrett & Sons Construction, and this is the kind of project we’ve handled across Glendale for years. The number at the top of this page is the number you’ll see on your written estimate. Here’s exactly where that money goes, what moves it up or down in Glendale specifically, and how to avoid the surprise invoice that too many homeowners get after the tile is already on the wall.
Key Takeaways
- A full walk-in shower installation in Glendale runs $4,500 to $12,000, with most jobs sitting between $6,000 and $8,500.
- Tile choice, glass style, and whether the drain has to move drive most of the price swing.
- Glendale’s older housing stock (much of it built between the 1920s and 1960s) often hides cast-iron drains and original plumbing that change the scope once walls open.
- Permits and inspections are included on every eligible job. A shower with a new drain location or valve work usually needs both.
- Every price change arrives as a written change order before the work happens. No surprise invoice at the end.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a typical Glendale walk-in shower project breaks down by line item. These are market ranges for 2026, not teaser numbers. Actual pricing depends on your bathroom’s size, condition, and finishes.
| Line Item | Glendale Price Range (2026) |
|---|---|
| Demo and haul-away of existing tub/shower | $400 – $900 |
| Plumbing rough-in (valve, drain, supply lines) | $800 – $2,200 |
| Waterproofing and shower pan (sloped, curb or curbless) | $700 – $1,800 |
| Wall tile and floor tile (material + labor) | $1,200 – $3,500 |
| Frameless glass enclosure | $900 – $2,800 |
| Shower fixtures and trim (showerhead, valve, handle) | $300 – $1,200 |
| Permit and inspection fees (Glendale) | $250 – $650 |
| Labor (framing, setting, finishing, cleanup) | $1,500 – $3,000 |
Add those up and you land right in the $4,500 to $12,000 range, depending on which finishes you pick and whether the plumbing underneath cooperates. That last point matters more in Glendale than in newer cities. A lot of homes here still have their original cast-iron drain lines, and when we open up a bathroom wall in a 1940s bungalow off Brand Boulevard, we sometimes find a drain that needs re-routing before a new shower pan can go in. That’s exactly the kind of thing that turns into a surprise invoice when it isn’t documented up front. With us, if the scope changes, you get a written change order before we touch a tile.
If your project is part of a bigger bathroom overhaul, our home remodeling services cover the full scope. A full Glendale bathroom remodel runs $9,000 to $28,000, and a small bathroom remodel runs $5,000 to $12,000. A walk-in shower is often the centerpiece of that work.
What Affects Walk-In Shower Installation Pricing in Glendale
Two showers of the same size can come in thousands apart. Here’s what actually moves the number in Glendale homes:
- Tile choice and pattern. A basic porcelain in a simple grid is the cheapest way to cover walls and floor. Large-format tile, marble-look porcelain, or an intricate pattern adds labor and material. A herringbone layout on a 4-foot wall can add $800 or more just in setting time. We install brand-name materials you can look up, not mystery tile off a van.
- Glass enclosure style. A framed pivot door is the budget option. A frameless glass enclosure with a fixed panel and door is the upgrade most Glendale homeowners want, and it typically adds $900 to $1,800 on its own. Custom-cut glass for an angled or unusual opening pushes higher.
- Curbless vs. curbed pan. A curbless shower (often called a zero-threshold or roll-in shower) requires the floor to be recessed or the whole bathroom floor to slope toward the drain. That’s more framing and waterproofing work, which adds $600 to $1,500.
- Hidden plumbing problems. Glendale’s older homes are where this bites. Cast-iron drains, galvanized supply lines, and the occasional surprise from a past DIY repair all add scope once walls are open. We document every one in writing before proceeding.
- Drain location. Moving the drain to center a new shower means cutting into the subfloor and re-routing the trap. Keeping the existing drain location saves money. If you’re converting from a tub to a shower, the drain often has to move regardless. Our tub-to-shower conversion guide covers that path in detail ($3,500 to $10,000).
- Permits and inspections. Any shower with a new drain location or valve replacement usually needs a permit and inspection in Glendale. We pull the permit and get the inspection signed on every eligible job, because the last contractor most homeowners used told them it was optional. It isn’t. The permit inspector works for you, not for us, and that’s a good thing.
How to Save on Walk-In Shower Installation
You don’t have to spend $12,000 to get a beautiful walk-in shower. Here’s where the smart money goes in Glendale:
- Keep the drain where it is. If your current shower drain is already roughly centered, leaving it in place saves $400 to $800 in re-routing and subfloor work.
- Choose large-format tile. Bigger tiles mean fewer grout lines and faster setting, which can lower labor by 10 to 15 percent versus a mosaic-heavy design. It also looks cleaner in a small Glendale bathroom.
- Skip the bench if you don’t need it. A built-in tile bench is comfortable but adds $500 to $1,200 in framing, waterproofing, and tile. A floating teak bench costs far less and can be swapped out later.
- Bundle the bathroom while walls are open. If your vanity or flooring is on its last legs, replacing them during a shower project costs less than coming back later. A bathroom vanity installation runs $800 to $3,000, and doing it alongside the shower means one demo, one permit, and one crew.
- Ask about our published offers. We offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Those are real standing offers, not promotional fine print.
One more thing worth saying plainly: an allowance that isn’t on paper is a surprise waiting for a date. When we quote your Glendale walk-in shower, the tile allowance, the glass allowance, and the fixture allowance are all written into the estimate. If you pick something different, the change order comes first. You’ll never get a bill at the end that reflects choices you didn’t know you were making.
Call (844) 560-4526 for a free estimate. A live person answers, day or night.
What’s Included in a Walk-In Shower Installation?
Our walk-in shower installations include demolition of the old tub or shower, plumbing rough-in for the valve and drain, waterproofing and a properly sloped pan, wall and floor tile, fixture installation, glass enclosure installation, cleanup, and haul-away. On every eligible job we also pull the permit and get the inspection signed before we call the work done. You get a written scope, written allowances, and a written 90-Day Done Right Promise. If something isn’t right, one call brings Tom back to make it right.
We install premium-brand fixtures because materials you can look up are materials you can trust. The same goes for our bathroom remodeling work across Glendale. Same standard, same written promise.
Can You Install a Walk-In Shower Over an Existing Tub?
Yes. A tub-to-shower conversion replaces your tub with a walk-in shower, and in Glendale that project usually runs $3,500 to $10,000 depending on tile, glass, and plumbing. The tub comes out, the drain usually gets re-centered, and a new sloped pan goes in. Older Glendale homes sometimes have a recessed tub alcove that makes the framing a bit easier, though the plumbing underneath can add scope. We document any change in writing before proceeding. If you’re just replacing a failing shower without changing the footprint, a shower replacement runs $3,000 to $8,500. Our shower replacement guide walks through that path.
Do You Need a Permit for a Walk-In Shower in Glendale?
Usually yes, if the project involves new plumbing, a moved drain, or a valve replacement. Glendale requires permits for most shower conversions and replacements where the plumbing is altered, and inspections verify the waterproofing and drain slope. We pull the permit and get the inspection signed on every eligible job, and that’s included in your written estimate. Skipping the permit to save a few hundred dollars is how you end up with a shower that leaks into a wall you can’t see and a problem a future buyer’s inspector will find. We don’t cut that corner, and we won’t pretend it’s optional.
How Long Does Walk-In Shower Installation Take in Glendale?
A typical walk-in shower installation takes 5 to 10 working days from demo to final inspection, depending on tile complexity and whether glass has to be custom-cut. A straightforward prefab-pan shower with a stock glass door can be done in under a week. A fully tiled custom walk-in with a frameless enclosure runs closer to 8 to 10 days, since glass fabrication and waterproofing cure times don’t compress. We’ll give you a realistic schedule in your written estimate, not an optimistic one you’ll have to call about later. And if a hidden plumbing issue adds a day, you’ll know before it happens.
Should You Repair or Replace a Shower?
Replace. If your shower is more than 20 years old, has recurring leaks, or the glass is fogged and the tile is loose, patching it costs $800 to $2,500 and buys you a few years at best. A full walk-in shower installation at $4,500 to $12,000 replaces the waterproofing, the pan, and the drain, which is where almost all shower failures actually start. Glendale’s older bathrooms are especially prone to failures hiding behind original tile. We’ve opened walls that looked fine on the outside and found a pan that had been leaking for years. If you’re weighing a new shower against a full bathroom remodel, the full remodel gives you one permit, one crew, and everything fixed at once.
Why Glendale Homeowners Call Barrett & Sons
Barrett & Sons Construction is owner-operated from day one. We pulled our first permit back in 1998, and Tom Barrett and his sons are on-site most days. That’s the opposite of a franchise dispatching strangers to your door. Our crew members are background-checked and carry the Barrett & Sons name, and calls are answered by a live person 24 hours a day, seven days a week, not a voicemail box or an out-of-state call center.
Our technicians have up to 28 years of experience. We’ve worked all over the area, from the bungalows near Adams Square to the hillside homes above Glenoaks and the condos downtown, and we’ve seen the same problems turn up again and again. The permit inspector works for you, not for us, and we treat that as a good thing. Ask anyone on your street, or look up the license number yourself. We publish it. Our name is on the truck.
You’ll find us across the greater Glendale service area, and we also handle kitchen remodeling (from $14,000 to $45,000), roofing ($8,000 to $20,000 for a full replacement), and windows and doors (with impact window installation at $8,000 to $25,000). If your shower project is part of a larger remodel, or you’re adding an ADU ($90,000 to $220,000) with a full bath, we handle the whole scope under one roof, one permit, one written contract.
FAQs – Walk-In Shower Installation Cost in Glendale
How much does walk-in shower installation cost in Glendale in 2026?
Walk-in shower installation in Glendale runs $4,500 to $12,000 in 2026, with most single-shower projects landing between $6,000 and $8,500. The low end is a prefab-pan shower with basic porcelain tile and a framed glass door. The high end is a fully tiled walk-in with frameless glass, a bench, and re-routed plumbing. Call (844) 560-4526 for an exact quote – estimates are free.
Is it cheaper to repair or replace a walk-in shower in Glendale?
Repair is cheaper up front, usually $800 to $2,500, but replacement at $4,500 to $12,000 is the better value when the waterproofing or pan is failing. A patch fixes what you can see and leaves the leak where you can’t. In Glendale’s older bathrooms, the failure is almost always behind the tile. Call (844) 560-4526 to talk through which makes sense for your shower – the estimate is free.
Can you install a walk-in shower in a small Glendale bathroom?
Yes. A 3-by-5-foot alcove is enough for a comfortable walk-in shower, and many Glendale bungalows and condos have exactly that footprint. Keeping the existing drain location and choosing a curbless or low-curb design can keep a small-bathroom walk-in shower installation near $4,500 to $7,000. Call (844) 560-4526 to schedule a layout assessment.
Does walk-in shower installation include the permit and inspection?
Yes, on every eligible job the permit and inspection are included in the written estimate, typically $250 to $650 in Glendale. We pull the permit and get the inspection signed before we call the job done. The last contractor most homeowners used told them permits were optional. We don’t work that way. Call (844) 560-4526 to confirm what your shower needs.
Can I get a free estimate on a walk-in shower in Glendale?
Yes. We offer free estimates and a free second opinion on any written estimate you’ve already received. You’ll get a written scope, written allowances, and a written price before work starts, plus a 10% Senior & Veteran discount as a standing offer. Call (844) 560-4526 – a live person answers day or night.
Get Your Walk-In Shower Estimate
Ready to put a real number on your project? Call (844) 560-4526 for a free estimate on walk-in shower installation in Glendale. We’ll walk your bathroom, talk through tile and glass options, and hand you a written estimate with the full scope, the allowances, and the schedule before you decide anything. If something changes once walls are open, you’ll get a written change order before we proceed. Every completed job is backed by our 90-Day Done Right Promise, and calls are answered by a live person 24 hours a day. Ask anyone on your street, or look up the license number yourself. We’re Barrett & Sons Construction Glendale, and we’ll still be here when you’re ready.
Pricing reflects the Glendale market as of 2026. Barrett & Sons Construction Glendale offers free estimates – call (844) 560-4526.
What Our Customers Say
"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"Full kitchen down to the studs. He found the previous owner had done the wiring himself and it was genuinely dangerous, showed me, and put it right properly rather than boxing it back in."
- Augustus Nwachukwu"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."
- Thaddeus Oyelowo