Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Glendale Homeowners
Glendale sits in a valley where July afternoons push past 95 degrees and January nights drop into the 40s, and single-pane aluminum windows from the 1960s and 70s handle that swing about as well as you’d expect. They rattle, they fog, they leak at the sill during the first real rain, and the front door sticks every summer. We install and replace windows and doors across Glendale with brands you can look up yourself – Andersen and Marvin among them – and our crew members have up to 28 years of experience fitting them into stucco and plaster walls without cracking the finish. Calls are answered by a live person, day or night. Call (844) 560-4526 to schedule a free estimate.
What Our Windows & Doors Service Includes
Window Installation
New window installation means cutting and framing an opening for glass that wasn’t there before, or building out a frame in a wall that’s never held one. You need it when you’re adding a room, finishing a garage conversion, or opening up a dark hallway that’s had a blank wall since the house was built. We handle the framing, flashing, and stucco patching as one scope, pull the permit, and get the inspection signed before we call it done.
Door Installation
Door installation covers everything from a new front entry and sidelights to interior doors, French doors, and a back door that finally closes without a shoulder. You need it when a door has swollen past adjustment, when the frame is rotted at the threshold, or when you’re matching a new door to a remodel. We check the rough opening for plumb and square first, because a door hung in a crooked frame will drag again within a season no matter how good the hardware is.
Window Replacement
Replacement swaps old glass and frames for new units in the same opening, which is the job most Glendale homeowners actually need. You need it when the seals have failed, when you’re tired of heating and cooling the sidewalk, or when the frames are pitted past repair. We measure every opening individually – no two windows in a 1950s Glendale house are the same size – and Andersen and Marvin both build to those exact dimensions rather than forcing a stock unit into the hole.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames rated to stay in the opening under wind-borne debris. You need them if you’re in a high-fire or wind zone, if your insurer asks for them, or if you want the security of glass that doesn’t shatter into the room. Impact window installation in Glendale runs $8,000-$25,000 depending on count and frame material. We pull the permit and confirm the rating paperwork comes with the units, because the inspection and your insurer will both want to see it.
Energy-Efficient Windows
Energy-efficient windows pair low-E coatings and argon-filled glass with frames that don’t conduct heat, which matters in a valley that bakes from May through October. You need them when a west-facing room runs ten degrees hotter than the rest of the house or your power bill spikes every summer. We walk through the ratings with you in plain terms – U-factor, solar heat gain – and match the glass to the direction each window faces, since a north-facing bedroom and a west-facing kitchen don’t want the same unit.
Sliding & Patio Doors
Sliding and patio doors are the big glass panels that open a wall to the yard, and the ones that fail are usually the ones that were undersized for the opening. You need a new one when the track is worn past cleaning, the rollers have ground grooves in the rail, or the glass has fogged between the panes. We also install impact sliding glass doors and impact garage doors, setting the track level so the panel glides on one finger instead of two hands and a hip.
Custom & Geometric Windows
Custom and geometric windows are the arches, rounds, half-rounds, and odd trapezoids that give a Glendale Spanish Colonial or a 1920s bungalow its character. You need one when you’re restoring an original shape that’s been covered over, or matching a new addition to the house’s existing lines. These are built to template, not to a catalog page, and we template the opening in person before anything goes to the manufacturer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
Andersen and Marvin are the two names we fit most often in Glendale, and both have quirks worth knowing. Andersen’s 400 Series tilt-wash double-hungs tend to fail at the balance shoe first, and their retractable insect screens lose tension after a decade of sun. Marvin’s Integrity line is solid wood-core clad in aluminum, and the place we see wear is the sill and the weep holes, which clog with the valley’s dust and then back water into the frame. Knowing where each brand gives out first is how we tell you whether to repair or replace instead of guessing.
When a window or door project ties into a kitchen or bath refresh, homeowners often pick a Wellborn or Cambria finish for cabinetry and counters and want the window trim to match, and we coordinate that so the whole room reads as one job instead of three. Whether your windows and doors are Andersen, Marvin, or any other make, we can help.
Signs You Need Windows & Doors Right Now
- Fog between the panes. That haze means the seal has failed and the insulating gas is gone, so the window is no longer doing the job you paid for. It won’t fix itself, and the fog usually spreads until the whole unit is cloudy.
- Drafts or a whistling frame on a windy night. Air moving past the weatherstripping pulls your conditioned air out with it. In Glendale the Santa Ana winds will find every gap, and a draft you feel in October is a heat leak in July.
- The door sticks or drags through part of the year. Swelling and shrinking is normal; a door that catches every summer means the frame has moved or the hinges have pulled. Left alone, it wears the strike plate and the threshold until the door won’t latch.
- Water stains or soft wood at the sill or threshold. This is the one to take seriously. Rot at the sill means water is getting behind the flashing, and once it reaches the framing the repair gets bigger fast. Have it looked at before the rainy season, not after.
- Rattling glass or a frame you can flex by hand. Loose glass and soft frames are a security and safety issue on top of an energy one. A window that moves when you push on it may not hold in a strong gust or against an intruder.
Our Windows & Doors Process – Step by Step
- 1
On-site walk and measurement. We come out, measure every opening individually, check the frames for rot and the walls for cracks, and note which windows face which direction. You get a written scope before anything else happens, and any allowance is on paper, not left to a phone call later.
- 2
Written estimate and brand selection. We put the price in writing line by line, with the unit model and glass package named, so you can look up exactly what’s going in your wall. If you want a different brand or a higher glass rating, we re-quote in writing before you decide.
- 3
Permits pulled. Every eligible job gets a permit and an inspection signed. The permit inspector works for you, not for us, and we treat that as a feature, not a hassle.
- 4
Installation day. We protect the floors and furnishings, pull the old units, check the rough opening for square, and set the new ones with proper flashing and sealing. On stucco we patch and texture so the finished wall doesn’t show a seam. A laser level and a moisture meter come out on every job, not just the ones that look tricky.
- 5
Walkthrough and the 90-Day Done Right Promise. We test every window and door with you, show you how the hardware and screens work, and hand over the warranty paperwork. Every completed job carries the written 90-Day Done Right Promise: if it’s not done right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Glendale?
Most Glendale homeowners replacing whole-house glass land in the $4,500-$15,000 range for standard window replacement, and impact window installation runs $8,000-$25,000 once you’re buying rated glass and reinforced frames. A single failed unit or a new front door is a smaller job, and a whole-house replacement with custom geometric windows at the top of the line is a bigger one. The price moves with the number and size of openings, the frame material (vinyl runs less than wood-clad aluminum), the glass package, and how much trim and stucco repair the job needs. Old Glendale houses with odd-sized openings and plaster walls take more fitting than a newer build, and we price that in honestly up front rather than discovering it mid-job.
To avoid overpaying, get at least two written estimates and compare line items, not bottom lines – a cheap bid that leaves out flashing or stucco patching isn’t cheap once the change orders land. Our free estimate is itemized, every allowance is written, and any scope change gets a written change order before work proceeds. No surprise invoices. You can also bring us any other written estimate for a free second opinion before you sign. Call (844) 560-4526 and we’ll get you a number in writing.
Windows & Doors Near Glendale – Our Service Area
We work windows and doors across Glendale and the neighborhoods around it, from Adams Hill and Chevy Chase to the streets up toward Verdugo. Just over the hill we cover the Burbank service area, and east into the West Hollywood service area, plus Beverly Hills, San Fernando, and Los Angeles. Most estimates get scheduled within a few days of your call. You can see the full map of where we work on our Glendale service area page, or start back at our home page.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Glendale
It covers installing new windows and doors, replacing failed ones, and fitting impact, energy-efficient, sliding, patio, garage, and custom geometric units. If it’s glass set in a frame in your wall, it’s in scope. We handle the framing, flashing, trim, and stucco patching around it as one job.
A single door or a few replacement windows are usually a one-day job. A whole-house window replacement typically runs two to four days depending on how many openings and how much stucco patching is involved, and custom or impact units add lead time for the manufacturer to build them. We give you a realistic schedule in the written estimate, not an optimistic one on the phone.
Window replacement generally runs $4,500-$15,000 and impact window installation $8,000-$25,000, with single doors and small jobs priced lower and custom or whole-house jobs higher. Call (844) 560-4526 for an exact quote – estimates are free and itemized.
Yes, Andersen and Marvin are the two brands we fit most often, and we know where each one tends to wear out. Whether your windows are one of those or another make, we can help. We tell you honestly whether a repair makes sense or a replacement is the better spend.
A broken window or a door that won’t secure is a real safety issue, and we treat it that way. A live person answers the phone 24 hours a day and we’ll tell you straight what can be done and when. For planned replacements we schedule normally, because rushing glass into a wall is how flashing gets skipped.
Every completed job carries the written 90-Day Done Right Promise, printed on the contract rather than buried in fine print: if it’s not done right, one call brings us back. Manufacturer warranties on the units pass through to you, and we hand over that paperwork at the walkthrough. We also pull permits and get inspections signed on every eligible job.
Clear the area around each window and door, take down curtains and blinds, and move anything breakable off the sills and floors. Plan to be home for the walkthrough at the end so we can test every unit with you. If a room needs to stay usable, tell us when you book and we’ll sequence the work around it.
Schedule Your Windows & Doors Service in Glendale Today
If your windows fog, your doors stick, or you’re ready to swap that old aluminum for something that actually holds the valley’s heat out, we’d like to take a look. Call (844) 560-4526 for a free, no-obligation estimate in writing, with every brand and allowance named. A live person answers day or night. We’ll tell you what it costs and stand behind it with the 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction.