Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Glendale, CA
Cabinet installation and refacing in Glendale covers two different jobs with two different price tags: full cabinet replacement, where old boxes come out and new ones go in, and refacing, where your existing cabinet frames stay put and we swap the doors, drawer fronts, and veneer. Refacing usually runs $4,000 – $11,000 on a typical Glendale kitchen, while full installation lands between $8,500 and $28,000 depending on layout and material. If your boxes are solid and level, refacing saves real money. If the frames are sagging, water-swollen, or laid out wrong, replacement is the smarter call.
Barrett & Sons Construction is owner-operated. Tom Barrett and his sons run the crews, and every eligible cabinet job gets permits pulled and inspections signed. We install premium cabinets and stone the way they need to be installed: Wellborn boxes and Cambria quartz tops are common picks because you can look them up, read the spec sheets, and know exactly what’s going into your kitchen. When you’re ready to talk numbers, call (844) 560-4526 for a free estimate.
This page is part of our larger Kitchen Remodeling in Glendale work, so if you’re weighing cabinets as part of a full remodel, start there and we’ll map the whole scope in writing.
Key Takeaways
- Refacing keeps your existing boxes and swaps doors, fronts, and veneer; full installation replaces the boxes themselves.
- Glendale’s 1930s – 1960s bungalows and mid-century ranches often have oddly sized cabinets that need custom or semi-custom sizing.
- Refacing typically runs $4,000 – $11,000; full installation $8,500 – $28,000 before countertops.
- Every price change sits in a written change order before a single nail moves.
- Backed by the written 90-Day Done Right Promise.
When You Need Cabinet Installation & Refacing
- Your cabinet doors won’t stay closed or the drawers grind against the frame. Warped boxes in a 1950s Glendale ranch are a common call, and the fix often depends on whether the frame itself is still square.
- You’re planning to sell and the kitchen looks tired but the layout works. Refacing in a place like Adams Hill or Sparr Heights is usually the faster, cheaper move when the boxes are sound.
- Water staining near the sink or under the dishwasher has started. Glendale’s older plumbing sometimes weeps slow, and soft cabinet bottom panels are the first clue.
- You want stone counters (Cambria, Silestone, Caesarstone) and the current boxes can’t carry the weight. That’s a replacement job, not a reface, and we’ll tell you plainly which one you’re looking at.
- The layout is wrong for how you actually cook. Somebody moved a fridge twenty years ago and the cabinets never caught up. New boxes let us reset spacing and add storage you didn’t know you had room for.
- You have a niche or awkward corner no stock cabinet will fill. Glendale’s older kitchens are full of these quirks, and semi-custom sizing handles most of them.
Our Cabinet Installation & Refacing Process
- On-site walkthrough and measurements. We look at the boxes, check for soft wood, level floors, and out-of-square walls. Older Glendale homes shift a little over decades, and we measure the actual conditions, not the drawing.
- Written scope and allowances. Every cabinet line, every allowance, every material choice goes on paper before anything is ordered. The allowance that isn’t on paper is a surprise waiting for a date, so we put it all in writing up front.
- Permits where required. If the job touches electrical, plumbing, or structural work, we pull the permit and get it inspected. The permit inspector works for you, not for us, and that’s exactly how it should be.
- Demo and prep. Old cabinets come out cleanly, walls get patched and leveled, and the floor is protected. For refacing, we keep the boxes and prep the frames so the new faces sit flat.
- Installation. New boxes get set, shimmed, and fastened. Doors and drawer fronts go on square. For refacing, we apply the veneer and hang new doors over your existing frames for a clean, even look.
- Final walkthrough and sign-off. We check every door swing, every drawer glide, and every edge, then walk the job with you. Any punch items get addressed, and the 90-Day Done Right Promise is on the contract in writing.
Cabinet Installation & Refacing Pricing in Glendale
Here are realistic cost ranges for Glendale kitchens. These move with cabinet grade, kitchen size, and how much the boxes are doing the work versus the face. We give you a free second opinion on any written estimate you’re holding, so you can compare line by line.
| Scope | Typical Range | What Drives the Number |
|---|---|---|
| Reface (doors, fronts, veneer) | $4,000 – $7,500 | Cabinet count, door material, whether boxes need minor repair |
| Reface with new countertops | $7,000 – $11,000 | Counter material (Cambria and Silestone run higher than laminate), edge profile |
| Stock or semi-custom install | $8,500 – $16,000 | Cabinet brand, number of boxes, layout changes, hardware |
| Full custom install | $16,000 – $28,000 and up | Wellborn-level builds, unusual sizes, added storage, glass, and lighting |
| Pull permit and inspection | $250 – $800 | Whether the job touches electrical or structural work |
What pushes the number up: an out-of-square kitchen that needs wall work, moving a sink or range, adding electrical for under-cabinet lighting, and custom sizing for the odd corners in older Glendale homes. What keeps it down: keeping the layout, choosing a solid mid-grade door, and refacing good boxes instead of replacing them.
Refacing is the cheaper move when the boxes are solid. Replacement is the cheaper move over time when the boxes are failing, because a reface on a rotting frame is money on a problem you didn’t fix. We’ll tell you which one you’re actually looking at, and if the answer is reface, we’ll say so even though it’s the smaller job.
Want a number for your kitchen? Call (844) 560-4526 for a free estimate. Estimates are free, there’s no trip charge inside the county, and you’re welcome to a free second opinion on any written estimate from another contractor. If you’re comparing this against a broader project, our home page lays out everything we do.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace cabinets in Glendale?
Refacing is usually cheaper, often by half, when your cabinet boxes are solid and the layout works. Refacing keeps the frames, so you’re paying for doors, fronts, and veneer instead of the whole box assembly. Replacement costs more but fixes problems refacing can’t touch, like sagging frames, water damage, or a layout that doesn’t fit how you use the kitchen. We check the boxes first and give you a straight answer. Call (844) 560-4526 for a free look.
How long does a cabinet install take in Glendale?
A refacing job typically runs two to four days, while a full installation runs one to three weeks depending on cabinet lead times and whether electrical or plumbing is involved. Semi-custom and custom cabinets (Wellborn and similar) have their own build timelines, and we give you those dates in writing before you order. Permits add inspection days, and those get scheduled alongside the work so the job keeps moving.
Do I need a permit for cabinet work in Glendale?
Straight replacement or refacing generally doesn’t need a permit, but anything that touches electrical, plumbing, or structural framing does. Adding a circuit for under-cabinet lighting, moving a sink, or opening a wall all cross that line, and we pull the permit and get it inspected on every eligible job. Plenty of homeowners have been told permits were optional by the last contractor. They aren’t. The inspector works for you, not for us.
Can we install Cambria or Silestone counters with our existing cabinets?
Often yes, but only if the existing boxes can carry the weight, and stone counters are heavier than most people expect. Cambria, Silestone, and Caesarstone are common picks in Glendale kitchens because they hold up well and you can read the spec sheet before you buy. We check the boxes, verify level and fastening, and tell you plainly if a reface won’t support the stone. If it won’t, we’ll lay out the fix in a written scope so the call is yours to make.
What if the estimate changes once you’re in the walls?
You get a written change order before any price change touches the job. We look at the conditions during the walkthrough so surprises stay rare, but older Glendale homes sometimes hide things behind the drywall. When that happens, the number gets put on paper, you approve it, and work resumes. No surprise invoices at the end. That’s the promise, and the 90-Day Done Right Promise sits on the contract too.
Ready to stop guessing what your kitchen costs? Barrett & Sons Construction Glendale installs and refaces cabinets, pulls the permits, and puts every scope, allowance, and price change in writing. Call (844) 560-4526 for a free estimate. Ask about the $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, the No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount. And if you’re thinking about more than cabinets, explore our Kitchen Remodeling work – doors, drawers, and counters are usually the start, not the whole job.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale.