Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Home Additions & ADU Across Culver City
Culver City homeowners: if you’re thinking about adding square footage, an ADU, or a second story, you’re in the right place. We know this city block by block, from the 1940s bungalows near Carlson Park to the Sunkist Park homes that sit close to the Washington Blvd line. Culver City runs its own building department and fire authority, separate from LA City and County, so getting a project permitted here takes a contractor who knows the local plan-check process, not one guessing at it. Call (844) 560-4526 and we’ll walk through your lot, your setback questions, and a written scope before anything gets signed.
Why Barrett & Sons Construction Is Culver City’s Preferred Home Additions & ADU Company
Barrett & Sons Construction is owner-operated, founded in 1998, and Tom Barrett’s name, address, and license number are all published so you can look them up before you sign anything. The name on the truck matches the name on the contract. That matters when you’re spending five figures on an addition and want to know who’s actually responsible for the work.
Every scope, every allowance, and every price change comes to you in writing before work happens. No surprise invoices at the end. Permits get pulled and inspections get signed on every eligible job, because too many homeowners here were told permits were optional by whoever they hired last.
Calls are answered by a live person 24 hours a day, seven days a week, not a voicemail box or an out-of-state call center. When something comes up on a Culver City job, you reach someone who can actually respond. Every completed project is backed by our 90-Day Done Right Promise: if it’s not done right, one call brings Tom back to make it right.
You’ll also find the details behind our Home Additions & ADU work laid out for every service line across our site, and here on this page we’ve gone deep on what’s specific to Culver City.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Culver City Factor That Decides Your Schedule: Two Building Departments
Here’s a local insight that catches people off guard. Culver City has its own building department and fire authority with plan-check timelines that don’t match LA City’s, and if your property sits near the municipal line along Washington Blvd or Venice Blvd, which jurisdiction holds your permit changes the whole calendar. The same ADU scope, identical drawings, same square footage, can move on two very different timelines. We’ve seen projects stall for months because the general contractor assumed LA would review it and submitted to the wrong counter. That delay has nothing to do with your design or your budget. It’s purely a paperwork-and-jurisdiction problem, and it’s avoidable if someone confirms the jurisdiction before the first sheet goes in.
A typical 1940s Culver City bungalow being expanded or converted to an ADU often hides old plumbing and a 60-amp panel inside the subfloor and load-bearing walls. Those fail rough-in inspection, the general contractor pulls a written change order to upgrade the electrical service and re-frame, and the permit clears. Marine-layer moisture and Santa Ana wind-driven rain then go after underlayments and fasteners that weren’t specified for coastal-adjacent exposure. The fix is re-specifying stainless or hot-dip hardware and sealed joints before the next inspection sign-off. All of that is why the coastal-spec version of a job usually costs more up front than the inland-spec, and why the cheap spec costs more within a decade.
Our Home Additions & ADU Services in Culver City
ADU Design & Permitting
We handle the design and the Culver City permit package together, which matters because this city enforces its own ADU and inclusionary requirements. Getting the drawing set aligned with Culver City’s plan-check early saves the kind of schedule surprise that comes from straddling the Washington/Venice Blvd municipal line. For a typical Culver City ADU, that permitting stage is where a lot of the risk lives.

New Detached ADU
A new detached ADU in Culver City typically runs $90,000 – $220,000, and the spread comes down mostly to lot conditions, utility runs, and the finish level you pick. The mild, dry coastal climate means slab-on-grade and stucco construction can go up year-round without a freeze risk, so we’re not fighting the calendar the way builders do in colder parts of the country. That same mild climate is why our material choices follow coastal money, not cold-weather money.

Garage Conversion ADU
Garage conversions start around $30,000 – $80,000 in Culver City, and many of the older detached garages behind 1920s – 1950s Spanish Colonial homes on the blocks near Fox Hills need foundation, electrical, and plumbing work before they can legally become livable space. We build the conversion and the utility upgrades into one written scope so nothing shows up as a surprise line item later.

Junior ADU & Interior Conversion
A junior ADU is often the fastest path to rental income on a Culver City property, since it works within the existing footprint of the home. The tricky part is that these older houses were built to 1940s standards, and the electrical panel and plumbing frequently need an upgrade before the conversion can clear inspection. We scope that work up front instead of meeting it at rough-in.
We also handle room additions, second story additions, sunrooms, and enclosed patios. If you already know what you’re after, we’ll give you the written scope before any work starts.
Trusted Brands We Service in Culver City
Windows and hardware are where coastal-spec choices decide how long a finish lasts. We work with CWS and ES Windows on frames that hold up to the marine layer, and specify stainless or hot-dip fasteners wherever a standard galvanized part would start to fail within a few years. We don’t stock parts locally and we don’t pretend to, but when a job calls for a particular window series or finish, we source it and we won’t swap you a mystery brand off a van. You look up the brand name before the work begins.
Common Home Additions & ADU Problems We See in Culver City Homes
- Salt-air corrosion on galvanized fasteners and railings. Standard galvanized parts start to fail within 5 – 7 years in Culver City’s coastal-adjacent air. Re-specifying stainless or hot-dip hardware up front avoids the costly re-work this shortcut always brings.
- Wrong-jurisdiction plan-check delays. A project straddling the Culver City/LA line without confirming which department holds the permit can miss inspection sign-off and slide months off schedule. The scope never changed, only the address.
- Inland-spec window frames and paver joints. Frames and joints that work fine inland fail early in Culver City’s marine layer, blowing the allowance and triggering a change order. Sealed joints and marine-grade frames are the fix.
- Hidden infrastructure inside 1940s walls. A lot of older bungalows near Carlson Park and Sunkist Park carry a 60-amp panel and plumbing that fails rough-in. Better to find it in the written scope than at the inspection.
See the difference
Before
After
Before
After
Before
AfterPricing for Home Additions & ADU in Culver City, CA
Honest numbers for Culver City, not a “call for pricing” runaround. Here’s what these projects typically run in this market, and the biggest cost drivers are lot conditions, utility upgrades, jurisdiction, and finish level. The spread between a coastal-spec and an inland-spec version of the same addition is real, and it’s the difference between a finish that lasts and one that needs re-work within a decade.
| Service | Typical Culver City Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
Every estimate we give includes a written line-item scope and allowances, and any price change arrives as a written change order before the work moves forward. Estimates are free, and a second opinion on any written estimate is free too. Call (844) 560-4526 to schedule yours.
We Also Serve Cities Near Culver City
The same coastal-spec approach we use in Culver City carries over to the neighboring communities we serve, including Marina del Rey, Beverly Hills, View Park-Windsor Hills, and Santa Monica. If you’re just over the line and want a second opinion on a written estimate or a fresh scope, we’re happy to take a look at Home Additions & ADU in Culver City and the surrounding areas.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Home Additions & ADU in Culver City
Yes, if the property legally sits within Culver City, it needs Culver City permits regardless of how close it is to the LA boundary. Culver City has its own building department and fire authority with plan-check timelines that differ from LA City’s, so confirming the jurisdiction before you submit is the single biggest thing that keeps an ADU schedule on track. Call (844) 560-4526 and we’ll help you confirm which department holds your permit before anything is filed.
Stainless-steel or hot-dip galvanized fasteners and marine-grade window frames are the parts that last here. Standard galvanized hardware starts to corrode within 5 – 7 years in Culver City’s salt-tinged air, and inland-spec window frames fail early once the marine layer and Santa Ana wind-driven rain work on the seals. We specify marine-grade frames and stainless or hot-dip fasteners as standard on coastal-adjacent work, and you’ll see the brand name in the written scope. Call (844) 560-4526 for an exact materials breakdown.
The coastal-spec version of the same addition typically costs more up front, and the money goes into the parts that don’t come back: stainless or hot-dip fasteners, marine-grade window frames, and sealed paver joints. The inland-spec shortcut saves a few percent on the front end, then costs you more within a decade because those parts fail early and the re-work runs into real money. Our written line-item estimate shows you both paths. Call (844) 560-4526 and we’ll put the numbers side by side.
Scope, allowances, the schedule, the permit responsibility, and every price change should all be in writing before work starts. An allowance that isn’t on paper is a surprise waiting for a date, and a price change that arrives at the end is a fight you didn’t sign up for. Our contract names the jurisdiction we’re pulling the permit from, includes the 90-Day Done Right Promise on the page, and gets every change order signed before a nail moves. Call (844) 560-4526 to see a sample scope.
These homes were built to 1940s standards, and a lot of them still carry a 60-amp panel and plumbing that won’t clear today’s rough-in inspection once the space becomes habitable. The subfloor and load-bearing walls on the typical Culver City bungalow hide those systems, so the upgrade is real work, not a line-item padding. We build the electrical service upgrade and plumbing into the written scope up front so it isn’t a surprise change order later. Call (844) 560-4526 and we’ll walk the panel and the plumbing with you before you commit to anything.
Schedule Your Free Culver City Estimate
Whether you’re converting the garage behind a Fox Hills bungalow or planning a second story near Sunkist Park, start with a written scope and a real conversation. Call (844) 560-4526 for a free estimate, and we’ll look at your lot, confirm the jurisdiction, and put the coastal-spec choices next to the inland-spec ones so you can see what each really costs over time. A live person answers, any hour, and the estimate is free.
Written by the team at Barrett & Sons Construction.