Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Small Kitchen Remodel Really Costs in Glendale, CA
A small kitchen remodel in Glendale runs $9,000 to $20,000 for a galley or compact footprint where cabinets, countertops, and finishes stay in roughly the same layout. But on a 1920s-40s bungalow near downtown or up in Adams Hill, the honest number often lands in the broader $14,000 to $45,000 kitchen range once the walls open and you meet the wiring and plumbing that a national average pretends isn’t there. Call (844) 560-4526 for a free estimate and we’ll name those costs before you sign, not after demo. Every job includes pulled permits, written allowances, and the 90-Day Done Right Promise.
Why a 1935 Adams Hill Kitchen Costs More Than a 1990s Tract Kitchen
The cabinets and countertops can be identical. The difference is what’s behind the plaster. Open a wall in a pre-1950 Glendale kitchen and you’ll usually find knob-and-tube wiring, early cloth-wrapped Romex, and galvanized drain lines that have been quietly corroding for decades. None of that shows up in the “small kitchen remodel cost” figures you’ll find on national cost sites, because those numbers are averaged across a country full of newer homes.
What it means in dollars: electrical rough-in to replace old wiring in a small Glendale kitchen typically adds $2,500 to $6,000, and replacing galvanized or cast-iron drain lines under the floor adds another $1,500 to $4,000. That’s real money, and it’s why some quotes come in dramatically low and then grow by change order the moment the drywall is gone. We build those line items into the first estimate as likely scenarios. Scope in writing, allowances in writing, change orders in writing.
Glendale adds a permit layer most cities don’t. Much of the city sits in Very High Fire Hazard Severity Zones up in the Verdugos and San Rafael Hills, and the building department now requires engineering and as-built verification on hillside properties that carry undocumented additions or non-engineered deck tie-backs from decades back. A remodel that would sail through in Burbank can stall for weeks here if the paperwork isn’t squared away. We pull every eligible permit and get every inspection signed, because the permit inspector works for you, not for us.
Glendale Small Kitchen Remodel Cost Breakdown
Here’s how the line items land in this market. Ranges reflect a compact kitchen; a bigger footprint scales up toward the full $14,000 to $45,000 figure.
| Line Item | Typical Range |
|---|---|
| Small kitchen remodel (compact footprint, same layout) | $9,000 - $20,000 |
| Cabinet installation | $4,000 - $13,000 |
| Countertop installation | $2,000 - $6,500 |
| Backsplash installation | $800 - $2,500 |
| Kitchen island installation | $3,000 - $10,000 |
| Electrical rough-in (pre-1950 wiring replacement) | $2,500 - $6,000 |
| Plumbing rough-in (galvanized/cast-iron drain replacement) | $1,500 - $4,000 |
Two things drive where you land in that table: how much of the original wiring and plumbing has to go, and the material tier you pick. We specify KraftMaid cabinetry and Cambria countertops, so when you compare our quote to another contractor’s, you’re comparing the same product category, not a mystery cabinet brand off a van. Published warranties and lead times you can verify before a single nail moves.
For the full scope of what a Glendale kitchen project can include, see our Kitchen Remodeling services.
Common Scenarios We See in Glendale Kitchens
- The Spanish Colonial down to the studs. A wall comes out near downtown, the old wiring won’t pass inspection, and the drain lines are close behind. We name both upfront so the budget holds.
- The hillside kitchen with an unpermitted past. Off Glenoaks or in Chevy Chase Canyon, we regularly find additions that were never permitted and balconies that fail current engineering. The permitting step runs longer here, and we tell you that on day one.
- The 1960s north-Glendale stucco tract home. Simpler on wiring, but Title 24 energy compliance still triggers on the remodel, and south- and west-facing exterior surfaces have taken a beating from Santa Ana summers. We factor the compliance line in rather than discovering it later.
- The “small” kitchen that stays small. Galley layouts where the goal is better cabinets and counters within the same footprint. That’s the $9,000 to $20,000 job, and it’s a genuinely good one when the bones are sound.
How We Keep the Price From Moving Under You
Most of the horror stories we hear start the same way: a national outfit quotes one price on the phone and hands over a different bill at the door. We do it the other way. Every material category carries a written allowance, and any change to that allowance arrives as a written change order before work adjusts. An allowance that isn’t on paper is a surprise waiting for a date. You’ll see ours in writing.
Barrett & Sons Construction Glendale is owner-operated, so the same crew that starts your kitchen is the crew that finishes it. Our technicians have up to 28 years of experience. When the job wraps, the 90-Day Done Right Promise is written on the contract: if grout cracks, a drawer stops closing right, or a seam opens inside the window, one call brings us back to make it right. That’s the difference between a name on a contract and a name you can find on Saturday at the hardware store.
If you’re weighing other trades after the kitchen, we also handle home remodeling and repairs across the property, so one written scope can cover more than the kitchen if that’s what the house needs.
Key Takeaways
- Small kitchen remodel in Glendale: $9,000 to $20,000 on a compact, same-layout job; $14,000 to $45,000 once pre-1950 wiring and plumbing enter the picture.
- Pre-1950 homes near downtown and Adams Hill commonly need electrical rough-in ($2,500 to $6,000) and drain-line replacement ($1,500 to $4,000) that national averages leave out.
- We specify KraftMaid and Cambria, name the likely surprises in the first scope, and put every change in writing before work moves.
- Permits pulled and inspections signed on every eligible job, backed by the 90-Day Done Right Promise.
FAQs
A small kitchen remodel in Glendale typically runs $9,000 to $20,000 for a compact footprint that keeps its layout, and $14,000 to $45,000 when a pre-1950 home needs its old wiring and drain lines replaced during the project. The wider range is the honest one for much of the city’s older housing stock. Call (844) 560-4526 for an exact quote, and estimates are free.
A low estimate usually means the pre-1950 wiring replacement and galvanized drain work weren’t listed as line items, so they surface later as a mid-project change order. Ask any contractor whether those costs are in the written scope. If they aren’t, you’re looking at a starting price, not a total. We’d rather give you the real number upfront. Free second opinion on any written estimate you’ve received.
Yes. We pull permits and get inspections signed on every eligible job, including the fire-zone and seismic considerations that apply to remodels in Glendale’s hillside neighborhoods. That extra paperwork is routine for us, and it protects you at resale. Call (844) 560-4526 to talk through your project.
Everything is covered in writing under the 90-Day Done Right Promise for the first 90 days after we finish. If a cabinet drawer doesn’t close right or a countertop seam opens, one call brings us back to fix it. No fine print, no runaround. Call (844) 560-4526 and we’ll schedule it.
Ready to get a straight number on your Glendale kitchen? Barrett & Sons Construction Glendale gives you a free estimate, written allowances, permits pulled, and a 90-Day Done Right Promise on every job. Call (844) 560-4526 today – a live person answers, 24/7 – and we’ll walk your kitchen and name the surprises before they cost you.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale, CA.
What Our Customers Say
"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"Full kitchen down to the studs. He found the previous owner had done the wiring himself and it was genuinely dangerous, showed me, and put it right properly rather than boxing it back in."
- Augustus Nwachukwu"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."
- Thaddeus Oyelowo