A Barrett company - serving Glendale, CA

Backsplash, Tile & Flooring in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Backsplash, Tile & Flooring in Glendale, CA

A new backsplash, tile floor, or shower surround in Glendale typically runs $1,400 to $9,000 depending on square footage, tile choice, and how much prep the substrate needs. Most kitchen backsplashes here finish in two to four days; a full floor tear-out and reset runs closer to a week. We’re Barrett & Sons Construction Glendale, and tile is one of the trades we handle as part of a larger Kitchen Remodeling in Glendale job or as a standalone project.

Here’s what we see in this city. Glendale has a lot of 1920s-to-1950s bungalows and Spanish Colonial homes, especially in Adams Hill, Somerset, and the streets off Lexington and Chevy Chase. Those houses were built with mud-set tile beds and original lath, and the floors underneath are rarely flat. A tile job that skips proper substrate prep will crack within a year or two, no matter how good the tile is. That prep work is the difference between a floor that lasts and one that keeps calling you back.

We install brands you can look up: Wellborn cabinetry to pair with a new backsplash, and Cambria or Silestone quartz for the counter edges where tile meets stone. If you’re weighing a full kitchen refresh, start with our home page and we’ll map out what makes sense for your house and budget.

When You Need Backsplash, Tile & Flooring

Most calls come in for one of these reasons. If you recognize your situation in a few of them, it’s worth a walkthrough.

  • Your backsplash is dated or damaged. The 4-inch builder slab behind the counter has cracked, or the 1990s 4×4 white tile is loose and the grout is failing. In Glendale kitchens, we regularly see original tile pop loose after a dishwasher leak runs underneath it for a season.
  • The kitchen counter is getting replaced. New countertops almost always mean new backsplash, since the old tile sits behind or against the old stone and won’t line up. We set the tile to the new counter edge and cut it clean.
  • You have cracked or hollow-sounding floor tile. A hollow thud when you tap a tile usually means the thinset failed. Cracking along a grout line, especially near a doorway or over a crawlspace, often points to floor deflection rather than the tile itself.
  • A bathroom shower or floor surround is leaking into the wall. Stained grout, soft drywall behind the tile, or a musty smell in a nearby closet usually means the waterproofing failed. We rebuild the pan and the wall board, not just the tile face.
  • You’re remodeling and want the tile decided up front. Picking tile before cabinets and counters go in keeps everything on schedule. Our Kitchen Remodeling team builds the tile into the same written scope so nothing gets tacked on later.
  • The floor is uneven and a floating or vinyl floor won’t hide it anymore. Glendale’s older homes often have a slope toward a drain or a dip where a wall once stood. Tile needs a flat substrate, so we measure and correct it before setting a single piece.

Our Backsplash, Tile & Flooring Process

We do this the same way every time, whether it’s one backsplash or a whole kitchen floor. Everything gets written down before we move a tool.

  1. Walkthrough and measurement. We measure every wall and floor, check subfloor flatness, and note what’s behind the existing tile. If there’s old tile to remove, we check for water damage and old adhesive first. You get a written scope and a written allowance for tile and setting materials.
  2. Written scope and change orders. Every allowance goes on paper before work starts. If we open a wall and find rot or a failed shower pan, you get a written change order before we touch it. An allowance that isn’t on paper is a surprise waiting for a date.
  3. Demo and substrate prep. We pull the old tile, repair the substrate, and flatten floors or walls to spec. This is the step most crews rush. It’s also the step that decides whether your grout lines stay true in year five.
  4. Layout and dry-fit. We lay out tile lines before setting anything, dry-fit the cuts around outlets, cabinets, and door frames, and confirm the pattern with you. Glendale kitchens often need a balanced cut on both ends of a backsplash, and we plan for that.
  5. Setting and grouting. Tile goes down with the right thinset for the material and location. We waterproof the shower and wet areas before tile goes up. Grout and sealant go in after the setting bed cures, so nothing is grouted too soon.
  6. Final walkthrough and the 90-Day Done Right Promise. We walk the job with you, check every grout line and edge, and leave you with a written guarantee. If something’s not right in the first 90 days, one call brings us back.

Backsplash, Tile & Flooring Pricing in Glendale

Tile pricing depends on three things: square footage, the tile itself, and how much substrate prep your house needs. Here’s what jobs like yours typically cost in Glendale. These are real ranges, not teasers, and every one gets a written scope before work starts.

Project Typical Range Notes
Kitchen backsplash (30-40 sq ft) $1,400 – $3,200 Ceramic or porcelain; includes demo of old slab, substrate, set, and grout
Kitchen backsplash, natural stone or large-format $2,600 – $5,500 Marble, quartz slab, or tile over 12 inches; more layout and cutting
Kitchen floor tile (150-250 sq ft) $3,200 – $7,000 Includes tear-out, substrate flattening, set, and grout
Bathroom floor tile $2,200 – $4,800 Includes demo and proper waterproofing at the perimeter
Shower surround / walk-in shower tile $4,500 – $9,000 Pan rebuild and waterproofing included; wider range for natural stone
Substrate flattening (added prep) $400 – $1,800 Common in pre-1960 Glendale homes with out-of-level floors

What moves the price: tile material (porcelain runs less than natural stone; large-format tile runs more because it takes more set time), square footage, the condition of the substrate under the old tile, and whether there’s a shower pan to rebuild. Cambria and Silestone edges where tile meets stone are quoted on the counter, not the tile line, so we keep those separate in writing.

Every eligible job includes permits pulled and inspections signed. On a tile job that usually means a plumbing inspection if we open a shower wall or move a drain, and an electrical sign-off if we pull outlets for backsplash work. The permit inspector works for you, not for us, and that’s why we like him.

Free second opinion on any written estimate you’re holding from another contractor. We’ll look at the scope, not just the number. Standing offers that apply: $40 Off Any Repair Over $200, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Ask us about any of them on the call.

FAQs – Backsplash, Tile & Flooring

How much does a kitchen backsplash cost in Glendale?

A ceramic or porcelain kitchen backsplash in Glendale usually runs $1,400 to $3,200 for a 30- to 40-square-foot wall, and natural stone or large-format tile runs $2,600 to $5,500. The range comes down to tile choice, layout complexity, and how much old tile and substrate has to come out. Call (844) 560-4526 for an exact quote: estimates are free and the scope is written.

Can you fix a cracked or hollow tile floor without replacing the whole floor?

Often yes, if the problem is a single failed tile and the surrounding tile is still bonded. We tap the floor to map hollow spots, remove the loose pieces, and reset them with matching tile and grout. If the whole floor sounds hollow or the cracks run along a seam, the substrate has failed and a wider repair is honestly the better money. We’ll tell you which case you’re in after a walkthrough.

Do you pull permits for tile and shower work in Glendale?

Yes, on every eligible job. Shower pan replacements and any plumbing or electrical work touched during a tile job need a permit and an inspection, and those inspections protect the value of your home at resale. Many homeowners we meet were told permits were optional on their last job. They weren’t, and we pull them in writing.

How long does a backsplash or tile floor take?

A standard kitchen backsplash takes two to four days from demo to grout, and a typical kitchen floor takes four to seven working days including prep and cure time. A full shower rebuild runs closer to one to two weeks. Glendale homes with older substrates sometimes add a day or two to correct an out-of-level floor before tile goes down, and we tell you that before work starts, not after.

What’s the difference between the tile on my backsplash and the quartz on my counter?

The backsplash is a decorative and splash-resistant wall surface, while the counter is a structural work surface. We can set a quartz or natural stone backsplash with Cambria or Silestone corners to match your counter, or a ceramic tile with a decorative pattern. Either way, we plan the intersection so the counter edge and the tile line meet cleanly.

Why Homeowners Call Barrett & Sons Construction Glendale

We’re owner-operated, founded in 1998, and Tom Barrett’s name, address, and license number are published so you can look them up before you sign anything. Our technicians have up to 28 years of experience, and every crew member carries the Barrett & Sons name, background-checked and uniformed on every visit. Calls are answered by a live person 24/7, not a voicemail box. The 90-Day Done Right Promise is written on every contract: if something’s not done right, Tom comes back and makes it right with one call.

Tile work is one trade. If the kitchen needs more, our kitchen remodeling in Glendale team handles cabinets, counters, and layout in the same written scope. We also do bathroom remodeling and home additions and ADUs where tile and flooring come along for the ride. If you’re nearby, we serve La Crescenta, Pasadena, Burbank, and Eagle Rock too.

If your job includes a roofline issue found during the remodel, we handle roofing in Glendale, and if windows or doors get replaced at the same time, that’s windows and doors. Outdoor tile and hardscape are covered under driveway and pavers. Whatever the mix, every scope, every allowance, and every price change arrives as a written change order before a single nail moves.

Ready to talk tile? Call (844) 560-4526 for a free estimate. We’ll measure your kitchen, walk you through what a proper install needs, and put it in writing before anything changes. Barrett & Sons Construction Glendale keeps it straight.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale.

Need Construction help in Glendale? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch