Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Santa Monica, CA | Barrett & Sons Construction Glendale
We provide independent PGT service across Santa Monica, and the thing that separates our PGT work here from anywhere else is this: nearly every window and door job we touch is tied to a seismic retrofit, a coastal exposure problem, or both. PGT WinGuard and the aluminum and vinyl series are built well, but Santa Monica’s salt air, marine layer, and mandatory soft-story retrofit ordinance test them in ways a spec sheet doesn’t capture. If you need impact window installation, window replacement, or roof repair on a PGT-clad home, we know the details that keep those units performing on the coast. Call (844) 560-4526 to set up a free estimate on your PGT service.
Why Santa Monica Residents Choose Us for PGT Service
We work with PGT windows and doors every week in this coastal building stock, from WinGuard impact units to the aluminum and vinyl series, so the model families and their weak points are familiar ground. That matters here because PGT parts aren’t interchangeable with aftermarket knockoffs. Impact ratings and warranty coverage depend on using OEM replacement weatherstripping, hardware, and glass units, and we source those per job rather than assume a universal fit.
Response times stay reasonable because Santa Monica sits well inside our regular service area. When a WinGuard unit fogs or an aluminum frame pits through on a west-facing wall, you’re not waiting on a callback from three counties away. Every eligible job gets permits pulled and inspections signed, and every price change arrives as a written change order before work starts. That’s the 90-Day Done Right Promise in practice: if something’s off, one call brings the crew back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Solve in Santa Monica
- Salt-air corrosion on PGT aluminum frames. West- and south-facing elevations catch the marine layer and salt spray head-on. Fasteners and frame corners pit first, and once the finish breaks down the aluminum starts to chalk and weaken.
- WinGuard weatherstripping and gasket shrinkage. The gaskets on impact units dry out over time. During a Santa Ana wind event, that shrinkage turns into drafts and water pushing past seals that should be tight.
- Fogged or cloudy impact-glass seals. Constant UV and salt exposure break down the edge seal on PGT WinGuard IGUs faster near the beach than inland. Once the seal fails, the glass fogs and the insulating value goes with it.
- Water intrusion at sill pans and flashing. Older stucco walls on the numbered streets often have original building paper that’s been degrading for decades. Even a well-made PGT window leaks when the flashing behind it has given up.
- Anchorage gaps revealed during retrofit work. Opening walls for a soft-story or cripple-wall retrofit regularly uncovers aluminum windows with no proper anchorage or flashing in the same walls being strengthened.
PGT Service in Santa Monica: What Local Conditions Mean for Your Equipment
Here’s the local reality that shapes PGT work in this city more than anywhere nearby: Santa Monica‘s mandatory seismic retrofit ordinance for soft-story and cripple-wall buildings, layered on top of strict Coastal Development Permit and seismic review, often turns a structural job into a window job. When a permit is pulled to strengthen a soft-story apartment building or a cripple-wall bungalow on the numbered streets, the inspection almost always reveals that the original PGT or other aluminum windows in those same walls were never properly flashed or anchored. You can’t strengthen a wall and leave a leaking, unanchored window sitting in it, so the retrofit scope absorbs a window replacement scope. Add bluff-edge and liquefaction-zone soil conditions that can require geotechnical review before foundation work, and you get a city where construction is less about new build than about remaking old, dense, coastal-regulated buildings under some of the toughest seismic oversight in Southern California.
For PGT owners, that means the window question and the retrofit question are the same conversation. If you’re planning a retrofit, plan the window scope alongside it.
PGT Models & Products We Service in Santa Monica
We service the full PGT lineup you’ll find on coastal homes: PGT WinGuard Aluminum Impact Windows, PGT WinGuard Vinyl Impact Windows, PGT Aluminum Series Windows & Doors, and PGT Vinyl Series Windows. On WinGuard units, we use OEM replacement glass, weatherstripping, and hardware to keep the impact rating and warranty intact. On older out-of-warranty units, we inspect the frame before recommending repair over replacement, because corroded aluminum frames often justify new WinGuard units instead of chasing patches. Parts are sourced per job; we don’t claim local stock we don’t have. We’re an independent PGT service provider, not affiliated with or authorized by the manufacturer.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Santa Monica
Pricing here reflects coastal exposure and retrofit complexity, so we quote in writing and itemize the line items before any work begins.
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
What drives the number: how many units, whether frames are salvageable or need full replacement, whether retrofit coordination adds scope, and how much flashing and rot repair the rough openings need once we’re inside the wall. A free estimate includes an on-site inspection, a written line-item scope, and a straight answer on repair versus replace. Call (844) 560-4526 for your free estimate.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Santa Monica
Does Santa Monica require impact-rated windows for PGT replacements? Not universally across every property, but coastal and retrofit-adjacent projects frequently trigger impact-rated requirements under City Hall’s Coastal Development Permit and seismic review, so we confirm what your specific scope requires before ordering units.
How does salt air affect PGT aluminum windows in Santa Monica? It corrodes frames and fasteners fastest on west- and south-facing elevations where marine layer moisture settles, and it breaks down finishes and gaskets over time; routine inspection of frame corners and seals catches it early.
Can I replace just the glass in my PGT WinGuard window if it fogs? Often yes. If the frame is sound, we replace the failed IGU with an OEM-matched PGT glass unit to preserve the impact rating; if the aluminum is corroded, a full replacement usually makes more sense.
What permits are needed to replace windows in Santa Monica? Most replacements require a permit, and coastal or retrofit-tied projects can require additional review; we pull and manage the permits and see that inspections are signed.
Why do my PGT windows leak during Santa Ana winds? Usually shrunk weatherstripping, failing gaskets, or degraded sill flashing behind the unit. Call (844) 560-4526 for an exact diagnosis and quote; estimates are free.
Service Areas Near Santa Monica
Our Santa Monica service area connects to nearby work in Marina del Rey and Culver City, plus Glendale and Beverly Hills. If you’re just outside, call and we’ll confirm coverage.
Book Your PGT Service in Santa Monica Today
Don’t wait on a fogged WinGuard unit or a leaking frame until the next storm. Call (844) 560-4526 for a free estimate. A live person answers 24 hours a day, seven days a week, and we’ll tell you straight whether repair or replacement makes sense for your Santa Monica home.
Written by the team at Barrett & Sons Construction.