Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Beverly Hills, CA | Barrett & Sons Construction Glendale
We provide independent Unilock service across Beverly Hills, and the one thing that makes our Unilock work here different is plan check. Nearly every Beverly Hills project clears design review and city oversight before the first paver comes off the pallet, so layout, color and edge restraint get settled on paper, not improvised on the driveway. We’re an independent installer, not affiliated with Unilock, and our credibility comes from getting Unilock Brussels Block and Beacon Hill Flagstone through Beverly Hills review and inspection rather than from a manufacturer badge. Call (844) 560-4526 for a free estimate.
Why Beverly Hills Residents Choose Us for Unilock Service
Unilock is a system, not just a paver. The units, the edge restraint and the joint sand all have to work together, and most failing driveways in Beverly Hills fail at the edges and the base, not in the middle of the field. We know that rhythm: which Unilock lines match which estate architecture, how Brussels Block tumbles to read older than it is, and how Beacon Hill Flagstone keeps its irregular pattern on a motor court.
Our technicians have up to 28 years of experience working with genuine Unilock units and Unilock-spec components, not aftermarket substitutes that shift color within a season. Scope, allowances and any change come to you in writing before work starts, the permit gets pulled on every eligible job, and the 90-Day Done Right Promise is written on the contract. One call brings us back if something isn’t right. Beverly Hills homeowners have heard the phone-quote-then-different-bill story before; we don’t run that way. Look up the license number yourself before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Beverly Hills
- Efflorescence and salt bloom on Brussels Block and Beacon Hill Flagstone. Beverly Hills irrigation overspray and drip lines keep paver surfaces wet through hot, dry summers, and the salts push up as the surface dries. It’s cosmetic most of the time, but persistent bloom usually points at a drainage or watering problem worth fixing, not just scrubbing.
- Joint sand washout and paver shifting on driveways and motor courts. Santa Ana wind-driven debris plus seasonal irrigation cycling works sand out of the joints, and where edge restraint was undersized the field creeps. Once pavers migrate, no amount of re-sanding holds them.
- Retaining wall face spalling and settlement on hillside terraces. Above Sunset Boulevard, grading limits and slope drainage are tightly constrained, and walls built without properly engineered drainage settle and spall at the face. Beverly Hills hillside oversight makes this a design problem before it’s a repair problem.
- Color fade and surface scaling on older Unilock pavers. UV exposure over decades, plus deicing or pool-chemical runoff on estate hardscape, dulls the color and scales the surface. Matching a repair to a weathered field takes genuine units from the same line, not a generic blend.
- Undersized edge restraint on motor courts. Estate driveways take heavy vehicles turning at low speed, which loads the edges hard. Where the restraint was too light, the perimeter opens and the whole field follows.
Unilock Service in Beverly Hills: What Local Conditions Mean for Your Equipment
Here’s the Beverly Hills reality that shapes Unilock work and doesn’t travel to neighboring cities: properties on the city’s historic resources inventory can trigger cultural heritage review even for hardscape visible from the street. That means paver choice, color and layout on a Unilock driveway or motor court often has to read as period-appropriate to the home’s 1920s Spanish Colonial or Tudor architecture, not as a crisp modern paver field. A contemporary gray-on-gray grid that would sail through in another city can stall in review on a listed estate. So we start with the architecture and the inventory status, then match the line: Copthorne or Town Hall where the home calls for a period look, Brussels Block where a tumbled estate driveway fits, Beacon Hill Flagstone for patios and walkways that need to sit quietly against mature landscaping. Get that order right and the rest of the job, base, restraint, drainage, follows a plan the city has already seen.
Unilock Models & Products We Service in Beverly Hills
We work across the Unilock lines that make sense on Beverly Hills estates: Brussels Block for classic tumbled driveways and motor courts, Beacon Hill Flagstone for patios and walkways, Estate Wall and Brussels Dimensional Stone for retaining wall systems, and Copthorne or Town Hall where a period-appropriate look is required. On repairs we source genuine Unilock paver and wall units plus Unilock-spec edge restraint and polymeric joint sand matched to your existing line, so the patch blends into the field. We don’t claim local stock; units and components are ordered per job to match your line and color. Where a line is discontinued or the base underneath has failed, we’ll give you honest repair-versus-replace guidance rather than patch pavers over a bad subbase.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Beverly Hills
Paver work in Beverly Hills runs higher than in flatter, less regulated markets because plan check, hillside constraints and historic review add design and engineering time before installation. Here’s what the work typically runs:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives cost: square footage, base depth and drainage, whether the driveway is on a slope, edge restraint spec, and any design review or heritage review on a listed property. A free estimate includes a walk of the site, a look at the existing base and restraint, and a written scope with line items. Call (844) 560-4526 for an exact quote; estimates are free, and a second opinion on another written estimate costs you nothing.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Beverly Hills
Often, yes. Beverly Hills requires plan check on most projects, and hardscape visible from the street on a property listed in the historic resources inventory can trigger cultural heritage review. We pull permits and get inspections signed on every eligible job, and we plan layout and color to clear review the first pass. Call (844) 560-4526 to talk through your property.
Efflorescence is salt migrating to the surface as moisture dries, and in Beverly Hills it’s usually driven by irrigation overspray and drip lines keeping the pavers wet. Fixing the watering and the drainage stops the cycle; scrubbing alone doesn’t. Call (844) 560-4526 for an assessment and free estimate.
Usually, yes. We source genuine Unilock units and Unilock-spec joint sand matched to your existing line so the repair blends, then rebuild the base and edge restraint under the affected field. If the line is discontinued or the base is failing throughout, replacing is the honest call, and we’ll tell you so.
Yes. Beverly Hills’ hillside ordinance limits grading and requires geological reports for projects in the canyons above Sunset Boulevard, so wall design has to account for slope drainage and engineering, not just block stacking. A wall that settles or spalls at the face usually skipped that step. Call (844) 560-4526 to schedule an estimate.
Often, yes, for older pavers showing UV fade and scaling from pool-chemical or deicing runoff. Sealing runs $250 – $700 and slows surface wear, but it won’t fix a failing base or migrating edges. Call (844) 560-4526 and we’ll tell you honestly whether sealing helps or the base needs attention first.
Service Areas Near Beverly Hills
We also take Unilock work into the surrounding communities: Glendale, Burbank, West Hollywood, San Fernando, View Park-Windsor Hills and Culver City. Our Beverly Hills service area covers ZIP codes 90212, 90211, 90209 and 90213, and our Unilock service extends to estate driveways, patios and retaining walls across those areas.
Book Your Unilock Service in Beverly Hills Today
Whether it’s a shifted motor court, an efflorescence problem or a new Brussels Block driveway that has to clear review, we’ll walk the site, write the scope and give you a straight number. A live person answers the phone, and our technicians have up to 28 years of experience with Unilock systems. Call (844) 560-4526 for a free estimate.
Written by the team at Barrett & Sons Construction Glendale.