Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Santa Monica, CA | Barrett & Sons Construction Glendale
We provide independent Unilock service across Santa Monica for paver driveways, patios and retaining walls, and the one thing that sets our work apart here is this: we build to Unilock’s own base, compaction and edge-restraint specs, because on Santa Monica’s bluff-edge and alluvial-fan soils a pretty paver job with a weak base fails within a season. We install and repair Brussels Block, Beacon Hill, Uni-Stone II and Ecoloc systems for homeowners in 90402, 90404, 90401 and 90406. We’re not affiliated with, sponsored by or authorized by Unilock; we’re an independent installer who reads the manufacturer’s spec sheet and follows it. Call (844) 560-4526 to schedule a free estimate.
Why Santa Monica Residents Choose Us for Unilock Service
Barrett & Sons Construction Glendale is the name-on-the-truck alternative to outfits that quote one number on the phone and hand you another at the door. We’ve been proudly serving local communities for over 29 years, founded in 1998 and owner-operated from day one, and our technicians have up to 28 years of experience. Every scope, allowance and price change arrives as a written change order before work starts. Every eligible job gets permits pulled and inspections signed. And every completed job is backed by our written 90-Day Done Right Promise – if it isn’t done right, one call brings us back to make it right.
For Unilock work specifically, that discipline shows up in the part of the job nobody photographs: the excavation depth, the aggregate, the compaction passes, the edge restraint. We install this system the way Unilock’s specs call for, and we use the manufacturer’s own matching pavers, edge restraints and recommended joint sand so color, thickness and interlock stay consistent across a repair. Whether you’re re-laying a Brussels Block apron off Ocean Park Boulevard or resetting a Beacon Hill patio on a tight numbered street, you get a written price and a face you’ll see again at the hardware store. If you want to see how we handle Unilock across the region, start with our Unilock service page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Santa Monica
Most of the calls we get in Santa Monica aren’t about the pavers. They’re about what’s underneath them. Here are the five we see most.
- Efflorescence blooming on Brussels Block and Beacon Hill. In Santa Monica’s marine-layer humidity, white salt deposits wick up through the paver body and keep coming back. Scrubbing the surface treats the symptom; the fix is correcting the base drainage and joint sand so moisture stops moving through the slab.
- Rutting and lipping at driveway aprons. When pavers get laid over an under-compacted base on the alluvial-fan soil that runs under much of this city, the pavers stay fine and the base fails. You feel it as a dip or a rock at the seam. We re-excavate to spec, re-compact and re-lay.
- Edge creep and joint sand washout on patio perimeters. Missing or undersized edge restraint lets the field spread. Santa Ana wind-driven rain and hose runoff on tight lots with little setback speed it up. A proper edge reset plus re-sanding stops it.
- Salt-air corrosion of metal edge restraints, polymeric sand binders and wall-block connectors. On coastal-facing elevations the salt air attacks any metal hardware, and fasteners that were fine inland start to fail here. We swap to appropriate hardware and re-sand with the right material.
- Root heave where pavers were laid tight to mature ficus or eucalyptus. Surface roots lift the field one paver at a time. The honest answer is a root barrier and a re-based edge, not another patch.
Unilock Service in Santa Monica: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes this work in Santa Monica more than anywhere nearby: this city has a mandatory soft-story and cripple-wall retrofit ordinance, and it’s actively hitting the numbered-street bungalows and the beach-adjacent multifamily buildings. That means foundations and grade are being disturbed across whole blocks, and paver driveways, aprons and patio slabs that tie into those elevations often have to be pulled, re-based and re-laid after the retrofit rather than protected through it. The pavers aren’t worn out – the ground under them changed. It’s a sequencing problem you won’t run into in Glendale or Burbank, and it’s why we ask about retrofit status and geotechnical review before we ever quote a re-lay. On the bluff-edge and liquefaction-soil pockets near Palisades Park, we want that ground review in hand before foundation or base work gets permitted. Get the sequence wrong and you pay for the same driveway twice.
Unilock Models & Products We Service in Santa Monica
We work with Unilock‘s segmental paving and retaining-wall systems across Santa Monica. That covers Brussels Block, the tumbled dimensional paver we see most on driveways and aprons; Beacon Hill, the flagstone-look patio paver; Uni-Stone II retaining wall blocks; and Ecoloc permeable interlocking pavers for drainage-sensitive lots where stormwater has nowhere to go on a tight parcel. On parts, we use Unilock’s own matching pavers, edge restraints and the joint sand the spec calls for. Aftermarket blocks of a different thickness will telegraph and rock at the seams, so we don’t use them. We don’t claim to stock parts locally – we source per job so the color, thickness and interlock match what’s already in your field.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Santa Monica
On a typical Santa Monica lot, a Uni-Stone II or Brussels Block driveway or patio shows heaving, rutting or a fresh bloom of efflorescence within a season or two, and the homeowner assumes the pavers were defective. A qualified independent installer usually finds an under-compacted base over alluvial-fan soil, no free-draining aggregate, missing or corroded edge restraint, and joint sand washed out by marine-layer damp and wind-driven rain. Pricing reflects where your job falls in that range. Here’s what our work runs in this market:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the number: excavation depth, haul-off on tight lots, edge restraint length, drainage corrections, and whether a retrofit or geotechnical review is in play. A free estimate includes a walk of the site, a look at the base and edge, and a written line-item scope with written allowances. Call (844) 560-4526 for an exact quote – estimates are free.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Santa Monica
Are you authorized by Unilock? No. Barrett & Sons Construction Glendale is an independent installer, not affiliated with, sponsored by or authorized by Unilock. We work to Unilock’s published installation specs and use the manufacturer’s own matching materials, and we’re upfront about that independence.
Do you use OEM parts or aftermarket? We use Unilock’s own matching pavers, edge restraints and recommended joint sand. Aftermarket blocks of a different thickness will telegraph and rock at the seams, so we don’t use them. We source per job rather than claiming local stock.
How long does a paver repair or install take in Santa Monica? A targeted pull-and-relay of a few heaved or cracked pavers is often a day or two. A full driveway or patio install with base re-excavation, drainage and edge restraint typically runs several days to a couple of weeks, and retrofit sequencing or geotechnical review can add time to the front end. Call (844) 560-4526 and we’ll give you a written timeline with your scope.
Which Unilock models do you cover in Santa Monica? Brussels Block, Beacon Hill, Uni-Stone II and Ecoloc, including work on driveways, aprons, patios and retaining walls. If you’re unsure which line is in your yard, we can identify it on the estimate visit.
What does Unilock paver work cost in Santa Monica? Paver driveways run $7,000 – $18,000, paver patios $3,500 – $11,000, driveway replacement $5,000 – $14,000, and sealing $250 – $700. Coastal soil conditions, tight lots and retrofit sequencing move the number within those ranges. Call (844) 560-4526 for an exact quote – estimates are free.
Will salt air damage Unilock retaining wall blocks or paver edge restraints on a coastal-facing yard? Yes, salt air corrodes metal edge restraints, polymeric sand binders and wall-block connectors on coastal-facing elevations in Santa Monica, so the right hardware and sand matter. We spec for the exposure and replace hardware that’s already failing. Call (844) 560-4526 for a look at your yard.
Service Areas Near Santa Monica
We serve homeowners throughout Santa Monica and into neighboring communities, including Santa Monica service area work across 90402, 90404, 90401 and 90406. We also cover Marina del Rey, Culver City, Beverly Hills, West Hollywood and Burbank. If you’re just over the line, call and we’ll tell you straight whether we can help.
Book Your Unilock Service in Santa Monica Today
Pull-and-relay of a few heaved pavers, a full Brussels Block driveway, or a Beacon Hill patio re-based right after a retrofit – we quote it in writing, pull the permits and back it with the 90-Day Done Right Promise. A live person answers the phone 24 hours a day. Call (844) 560-4526 to schedule your free estimate in Santa Monica.
Written by the team at Barrett & Sons Construction Glendale.