Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose CGI Construction
Barrett & Sons Construction Glendale provides independent CGI cabinetry installation and remodeling service in Glendale, CA. We install CGI’s semi-custom kitchen and bath lines in older local homes where walls are rarely plumb and openings are rarely a stock size, and we handle the layout, hardware and refacing decisions that decide whether a CGI run looks custom or looks like a retrofit. Barrett & Sons Construction Glendale is not affiliated with, authorized by, or a dealer for CGI; we’re an independent installer. For a free estimate, call (844) 560-4526.
Glendale is a built-out city, so nearly every CGI job here is a remodel rather than new construction. That changes the work. We’re adapting cabinetry to plaster, to out-of-square corners, and to houses where a previous addition moved a wall two inches and nobody told the kitchen. We know Glendale, we know what CGI boxes do in these rooms, and we quote the whole scope in writing before anything comes out of a crate.
Why Trust Barrett & Sons Construction Glendale for Your CGI Construction?
Our crew members have installed CGI semi-custom lines across Allure, Essex and Hamilton, and they know the differences that matter: the 3/4-inch plywood box construction CGI uses across its semi-custom series is a genuinely good substrate, and it’s also the part of the cabinet most often ruined by a leak nobody caught. They know how a frameless box behaves when the wall behind it is out of square, and they know which hinge adjustments buy back a door reveal and which ones just move the rub.
That familiarity is what makes warranty-safe service possible. CGI’s coverage depends on correct installation, sensible clearances from heat sources, and hardware that isn’t forced into a position it wasn’t designed for. We work to those conditions rather than around them. Every eligible job gets permits pulled and inspections signed, every price change arrives as a written change order before work proceeds, and every finished job is backed by our written 90-Day Done Right Promise. A live person answers the phone 24 hours a day, seven days a week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Glendale
Most of what we’re called out for on CGI cabinetry isn’t a cabinet defect. It’s a decision made during install, in a room that was never square to begin with. Here’s what we actually see.
- Out-of-square runs causing door rub on frameless boxes. Glendale’s 1920s through 1940s bungalows near Adams Hill and downtown almost never have a plumb wall plane behind the cabinet line. When the original installer shimmed the run flat against an out-of-square wall instead of correcting it, doors on a frameless CGI box drift out of reveal and start rubbing at the corners. You’ll usually notice it on the cabinet next to the range first.
- Plywood box delamination and edge swelling at sink bases. The 3/4-inch plywood box is strong, but the exposed edge at a sink base or a dishwasher opening will swell and separate if a slow supply-line weep goes unnoticed for a season. This shows up as a soft, dark edge under the sink and a drawer that stops closing flush. It’s the single most preventable CGI failure we see.
- Hinge and slide failure on high-use doors and deep drawers. Factory hardware on a CGI semi-custom run is decent, but a deep pot drawer loaded with cast iron, opened several times a day for a decade, will wear its slide. Doors near a busy traffic path loosen at the hinge plate. The fix is usually hardware, not cabinetry.
- Finish failure on painted and thermofoil fronts near heat. CGI fronts installed directly beside or above a cooktop, or under a cabinet with no heat shield, can peel or lose bond at the edge. In Glendale’s hot, dry summers, that failure accelerates on south- and west-facing kitchen walls where afternoon sun loads the room.
- Mismatched replacement parts changing the reveal. A previous repair with a generic hinge or slide that doesn’t match the CGI series can throw off every door on that run by a few millimeters. It’s small, and it’s the reason a kitchen that looks fine in photos looks wrong in person.
CGI Parts & Our Repair-vs-Replace Approach
For hinges, slides, shelf clips and rollout hardware, we source OEM CGI-compatible parts where the series is still supported. Where OEM parts have been discontinued, we spec a matching-quality aftermarket replacement chosen to preserve the original door reveal and drawer alignment. We don’t drop in whatever’s on hand, because a hinge that’s a millimeter off changes how the whole run reads.
We don’t claim to stock CGI parts locally. Everything is sourced per job, which also means we’re not steering you toward a part because it’s sitting in a bin.
The repair-or-replace call is straightforward. If the boxes are solid and the finish is intact, re-fronting and re-hardware is often the smarter money, especially in a Glendale kitchen where the layout already works. If the box has swelled at a sink base, or a thermofoil front has failed structurally, replacing the run is the honest answer and we’ll say so. Call (844) 560-4526 for a free estimate on either path.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We check the wall plane for plumb and square before we touch a door, because on a CGI frameless run, the wall is the real cause more often than the hinge. We check sink and dishwasher openings for swelling, and we look at clearances around the cooktop.
- 2
Scope and parts in writing. You get a line-item scope naming the CGI series, the hardware spec, and the allowance for anything not yet chosen. Any change after that arrives as a written change order before work proceeds.
- 3
Install or repair. We reset or re-hang the run plumb and level, install new CGI-compatible slides and hinges, and fit fillers and trim profiles to close the gaps an out-of-square room leaves behind.
- 4
Test and adjust. Every door and drawer gets cycled by hand. Reveals are checked against a straightedge, not eyeballed.
- 5
Warranty and walkthrough. We walk the finished job with you and hand over the written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
A typical CGI kitchen call in an older Glendale home starts with doors that rub or won’t sit flush and drawers that drag. The boxes are usually fine. The wall plane is out of square and the original install shimmed the run instead of correcting it. A qualified independent installer resets or re-hangs the run plumb and level, replaces worn slides and hinges with CGI-compatible hardware, and only recommends re-facing or replacement when the box or finish has actually failed.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Glendale
We work with CGI’s semi-custom kitchen and bath lines, including Allure, Essex and Hamilton, and with the standard and custom-depth wall and base modules those series are built from. That covers adjustable shelving configurations, rollout trays, drawer organizers, and the trim and filler profiles that make an out-of-square room look intentional.
On the remodeling side, we handle cabinet installation and refacing, full kitchen remodeling, and kitchen design and layout. In Glendale that layout work often means engineering around a hillside home’s non-standard wall lengths or a rear addition that never lined up with the original kitchen.
We Also Service These Brands
CGI is one line we install, not the only one. We also work with KraftMaid and Cambria in kitchens, and with Silestone and Kohler for countertops, sinks and fixtures, so you can compare a CGI run against another semi-custom line in the same estimate instead of taking one brand on faith. Ask for the second opinion and we’ll put both on paper.
FAQs – CGI Construction Service in Glendale
No. We’re an independent installer and remodeler, not a factory-authorized dealer for CGI. That means we’re not bound to one brand’s answer, and we’ll tell you when a different line fits your kitchen better. We’re licensed, insured, and we publish our license number so you can look it up before you sign anything.
Yes, wherever the series is still supported. For hinges, slides, shelf clips and rollout hardware, we source OEM CGI-compatible parts, and where OEM has been discontinued we spec a matching-quality aftermarket replacement that preserves the original door reveal. We never install a mismatched drop-in that changes how the doors sit.
Hardware and adjustment work on an existing CGI run is usually a short job, often a day or two. A full cabinet installation or kitchen remodel in Glendale runs longer, and we give you the schedule in writing with the scope so you’re not guessing. Call (844) 560-4526 and we’ll walk through your job and give you a realistic timeline.
We cover CGI’s semi-custom kitchen and bath lines, including Allure, Essex and Hamilton, along with their standard and custom-depth wall and base modules and the matching accessories. If you’re not sure which series you have, the door style and box construction usually tell us.
Not when the work is done correctly. CGI’s coverage depends on proper installation, correct clearances from heat sources, and hardware used as designed. We work to those conditions, and on every eligible job we pull permits and get inspections signed, so there’s a record behind the work.
Here are the ranges we quote in Glendale, and they’re the numbers we hold to.
| Service | Typical Glendale Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Where you land in that range depends on the wall condition, whether the run needs re-hanging or just re-hardware, and what you choose for counters. Every price change after the scope is signed arrives as a written change order before work happens. Call (844) 560-4526 for an exact quote. Estimates are free.
Book Your CGI Service in Glendale, CA
If your CGI doors rub, your drawers drag, or you’re planning a kitchen remodel in Glendale and want a cabinet line installed by someone who’ll answer the phone afterward, call Barrett & Sons Construction Glendale at (844) 560-4526. Estimates are free, the second opinion on any written estimate is free, and there’s no trip charge inside the county. A live person picks up, any hour.
Written by the team at Barrett & Sons Construction Glendale.