Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Glendale, CA | Barrett & Sons Construction Glendale
We provide independent CGI service across Glendale, from hillside remodels in the Verdugos to pre-1980 bungalows near Adams Hill. The one thing that sets our work apart here: Glendale’s fire-zone and seismic rules mean a CGI weather barrier or roof underlayment has to tie into a fire-rated assembly, not just go up the way it would in Burbank or Pasadena. Barrett & Sons Construction Glendale works on CGI products daily. We’re not affiliated with or authorized by CGI. Call (844) 560-4526 for a free estimate.
Why Glendale Residents Choose Us for CGI Service
Glendale is a built-out city. Almost every project here is a remodel, an addition, or a hillside rebuild, so the CGI assemblies we touch sit inside older walls and under older roofs. That changes the job. You can’t just lay new barrier over wood lath from 1935 and call it done. We open the substrate, check it, and tell you in writing what we found before anything goes back up.
We know the CGI system lines: WeatherLogic™, Edge™ underlayment, Ice & Water Shield, and the CGI Stucco and EIFS systems. We use OEM components for barriers and flashing so system warranties stay intact, and switch to good aftermarket fasteners and sealants where it makes sense.
What you get is a contractor who answers the phone, pulls the permit, and hands you a written change order before any scope moves. Every price change is in writing. Every eligible job gets inspected. And every completed job carries the 90-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Glendale
- WeatherLogic™ tape failing at seams. Glendale’s south- and west-facing walls take intense sun and heat year after year, and that thermal cycling degrades the tape adhesive until seams open. Once water gets behind the barrier, stucco starts to bulge. We cut out the failed run, replace it, and re-tape to the manufacturer’s spec.
- Edge™ underlayment wrinkling under tile. Santa Ana wind-driven rain pushes sideways into hillside roofs in the Verdugos, and a wrinkled or torn Edge™ sheet is where it gets in. Tile roofs hide it until the deck is wet. We inspect the valleys and edges first.
- Ice & Water Shield lifting at edges and valleys. In Glendale’s hot, dry conditions, poor surface prep or a rushed application lets the membrane lose adhesion. That’s a slow leak into the sheathing. Prep and temperature matter more than most crews treat them.
- CGI EIFS cracking over unsound substrates. On 1920s-40s homes with original wood lath or unreinforced masonry, EIFS goes on looking fine and delaminates within a few seasons. The substrate has to be sound before any coating goes over it.
- Barrier continuity broken at penetrations. Vents, hose bibs, and window bucks cut through the drainage plane. If the flashing detail isn’t right, the water runs in behind the barrier instead of down and out.
CGI Service in Glendale: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every CGI job in this city: much of Glendale sits in Very High Fire Hazard Severity Zones in the Verdugo Mountains and San Rafael Hills, and that pulls Chapter 7A fire-resistant construction requirements into remodels and additions that would be routine in a flatland city. What that means practically: your CGI weather barrier and roof underlayment can’t be detailed in isolation. They have to integrate with ignition-resistant siding, ember-resistant vents, Class A roofing, and tempered glazing. On a typical hillside remodel, a contractor discovers the WeatherLogic™ tape has failed along a south-facing wall after years of thermal cycling and UV exposure. The fix isn’t just new barrier and fresh stucco. It’s new CGI WeatherLogic™ tied into fire-resistant detailing that satisfies Chapter 7A, then a verified drainage plane before the finish goes on. That extra step is why permits and inspections on Glendale hillsides run differently than they do one town over.
CGI Models & Products We Service in Glendale
We work across the CGI system lines that turn up most in Glendale remodels: the CGI WeatherLogic™ air and water barrier system, CGI Edge™ roof underlayment, CGI Ice & Water Shield, and CGI Stucco and EIFS systems. We don’t claim local stock, because we don’t keep a warehouse. Parts get sourced per job, matched to the system and the age of the home.
Our rule is simple. Barriers and flashing get CGI OEM components so the system warranty holds. Standard fasteners and sealants can come from a high-quality aftermarket source when it’s equivalent or better. In older Glendale homes, repairing an existing CGI installation is often the right call if the substrate is sound. Full replacement makes sense when there are several failure points or when code upgrades like Chapter 7A get triggered. To see how this fits our broader CGI service, that page lays out the full approach.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Glendale
CGI work is usually part of a bigger job, so the honest way to price it is line by line. Here’s what the main projects run in Glendale:
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
What drives the number: how much failed barrier or underlayment has to come out, whether the substrate is sound or needs repair, and whether Chapter 7A or seismic upgrades get triggered. A free estimate includes a written scope, written allowances, and a walkthrough of what we actually found behind the wall or under the tile. Pricing is fixed, and any change arrives as a written change order before work starts. Call (844) 560-4526 for an exact quote. Estimates are free.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Glendale
Yes. If your home falls in a Very High Fire Hazard Severity Zone, the CGI weather barrier and any exterior detailing have to integrate with Chapter 7A fire-resistant assemblies, not stand alone. We check your zone status before the scope is written, so the fire detailing is in the estimate instead of showing up later as a surprise.
Yes, when it’s installed to spec with proper prep and coverage. The risk in Glendale is heat and Santa Ana wind-driven rain working on a wrinkled or poorly sealed sheet, especially on hillside roofs in the Verdugos. We inspect edges and valleys before the tile goes down.
Only if the substrate underneath is sound. Original wood lath and unreinforced masonry from that era often isn’t, and EIFS over a failing substrate cracks and delaminates within a few seasons. We open it up and check first. If the substrate is solid, a repair is often feasible; if not, replacement is the right call.
Pre-1980 buildings and soft-story structures have to be brought up to current seismic standards during permitted work, so a bathroom remodel can trigger structural upgrades you didn’t plan for. That’s why the scope gets written after we’ve opened the walls, not before. Call (844) 560-4526 to talk through what your building may require. Estimates are free.
Yes, when the barrier and flashing details are done around the vent correctly. The vent itself is rated; the failure point is the penetration through the drainage plane. We detail each one so water runs down and out instead of in behind the barrier.
It depends on how much has to come out and whether fire or seismic upgrades are triggered, which is why it’s priced within the larger project range rather than as a flat fee. A kitchen remodel runs $14,000 – $45,000, a bathroom remodel $9,000 – $28,000, and a roof replacement $8,000 – $20,000. Call (844) 560-4526 for an exact quote. Estimates are free.
Service Areas Near Glendale
We serve homeowners across Glendale and the towns around it, including Burbank, West Hollywood, Beverly Hills, San Fernando, and View Park-Windsor Hills. If you’re on a hillside street or in a pre-1980 home anywhere in the area, see our Glendale service area page for coverage details. Work in Burbank and Los Angeles follows the same written-scope approach, though the fire-zone rules differ by city.
Book Your CGI Service in Glendale Today
Whether it’s failed WeatherLogic™ tape, a wrinkled Edge™ sheet, or a full kitchen or roof replacement, we’ll open it up, tell you what we found in writing, and quote it line by line. Permits pulled, inspections signed, and the 90-Day Done Right Promise on every job. Call (844) 560-4526 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Glendale.