A Barrett company - serving Glendale, CA

What Is the First Step in a Kitchen Remodel? (Glendale, CA)

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Is the First Step in a Kitchen Remodel? In Glendale, It’s Checking Your Property Record

The first step in a kitchen remodel is to pull your property’s permit history from the City of Glendale Building & Safety before you sketch a single cabinet layout. If you want the short answer: check the record, confirm your parcel’s fire-zone and seismic status, then design. Everything else (budget, contractor, materials) comes after that check, because what you find there decides how much design you actually need and what it will cost. Call (844) 560-4526 if you’d rather have someone walk you through what your address will require.

Most remodeling guides tell you to set a budget and pick a contractor. That’s fine advice for a flat lot in a newer suburb. Glendale isn’t that. It’s a built-out city where nearly every project is a remodel, addition, or hillside rebuild rather than new ground-up work, and the city carries a heavier permit burden than Burbank or Pasadena next door. That burden is the whole story of your first step.

Why the permit portal comes before the mood board

Search your address in the city’s permit history. If the last significant work on the house predates roughly 1990 and you’re on a hillside street, there’s a real chance the building department already has something flagged on your parcel. Discovering an undocumented addition in week one of planning costs you nothing but an afternoon. Discovering it in week three of a signed contract costs you time, money, and leverage over your own timeline.

Hillside streets off Glenoaks and up in Chevy Chase Canyon are where we see this most often. Decades-old unpermitted additions and non-engineered deck and balcony tie-backs turn up regularly, and Glendale’s building department now wants engineering and as-built verification before it will issue a new permit on those properties. That verification step stalls projects other cities wouldn’t flag at all. Knowing it up front lets you budget for the engineering review instead of scrambling for it mid-job.

What to Check Before You Choose a Contractor in Glendale

Think of it as a short pre-flight list, not a research project. You’re answering three questions: what the city already knows about your house, what fire-zone rules touch your walls, and what’s hiding behind the drywall. Get those three answers and the rest of the planning goes faster and straighter.

  • Permit history. Anything unpermitted, open, or expired on the parcel?
  • Fire hazard zone status. Is your property inside Glendale’s Very High Fire Hazard Severity Zone? Verdugo Mountains, the San Rafael Hills, and upper Chevy Chase Canyon are the usual suspects.
  • Seismic status. Soft-story and pre-1980 building retrofit mandates apply in Glendale in ways they don’t in flatland cities.
  • Construction era. A 1920s-40s bungalow near Adams Hill is a different project than a 1960s stucco tract home in north Glendale.

The fire-zone question catches homeowners off guard. If your kitchen touches the exterior at all (a new window, a vent hood penetration, an exterior door), and you’re in the VHFHSZ, Chapter 7A requirements for ignition-resistant materials may kick in. That affects both your material budget and your product selection before design even starts. A run-of-the-mill window swap in Pasadena becomes a tempered-glazing and Class A roofing conversation in Glendale. You want that conversation in the planning phase, not after the order’s placed.

The part nobody warns you about: older homes

Glendale’s housing stock runs from 1920s-40s Spanish Colonial and Craftsman bungalows to mid-century stucco tract homes to steep-lot customs in the hills. That means we routinely run into knob-and-tube or early Romex wiring, original galvanized and cast-iron plumbing, and unreinforced masonry that has to be brought up to current seismic and Title 24 standards once you open the walls. None of that is a deal-breaker. It just changes the scope, and the scope has to be honest before anyone quotes a number.

How We Handle the First Step Differently

Barrett & Sons Construction Glendale starts every kitchen with a pre-contract walkthrough. Someone from our team walks the kitchen before any numbers are on paper, and the point isn’t to sell. It’s to tell you what you’re actually looking at behind the walls based on the home’s age, construction type, and neighborhood. Our technicians have up to 28 years of experience reading exactly that, and it makes the first conversation an honest one.

The first real deliverable is a written scope document. Every trade itemized. Every allowance on paper. Every known unknown listed as a known unknown, not glossed over. We put it in writing because a kitchen remodel in a 1940s bungalow with original plumbing and no permits on the last addition is not the same project as a kitchen remodel in a 1990s tract home. If a price needs to change, you get a written change order before any work moves. The permit inspector works for you, not for us. Permits get pulled and inspections signed on every eligible job, because the last contractor most homeowners used probably told them permits were optional.

Take a look at the full scope of what we do for Kitchen Remodeling, and if you want the neighborhood-by-neighborhood version, our Kitchen Remodeling in Glendale page covers it. Start from the home page if you’re new to us and want the lay of the land.

Kitchen Remodel Costs in Glendale

Here’s what the numbers look like in this market. Treat these as ranges for planning, not a bid; your actual scope drives the final figure, and a hillside bungalow will land higher than a 1990s tract home for the same footprint.

Project Typical Glendale Range
Full Kitchen Remodel $14,000 - $45,000
Small Kitchen Remodel $9,000 - $20,000
Cabinet Installation $4,000 - $13,000
Countertop Installation $2,000 - $6,500
Backsplash Installation $800 - $2,500
Kitchen Island Installation $3,000 - $10,000

We install brands you can look up, not mystery labels off a van. KraftMaid and Wellborn cabinetry and Cambria quartz are all standard for us, and James Hardie shows up on exterior touches. None of that changes the first step: confirm the property record, then design, then price.

The most common first-step mistake we see

Homeowners pick a cabinet line and a countertop material before anyone has confirmed whether the floor plan they want is structurally achievable. In a bungalow with load-bearing walls that look decorative, that sequencing mistake can mean returning cabinets that were ordered to the wrong dimensions. It’s a costly way to learn that the pretty layout doesn’t fit the framing. Structural reality first, then cabinet specs. Every time.

FAQs

Before You Order a Single Cabinet

If you’d rather have your property record looked at by someone who does this every week, Barrett & Sons Construction Glendale offers a no-pressure assessment in Glendale. We’ll tell you what the city is likely to require, what’s behind the walls, and what the scope really looks like. Call (844) 560-4526 for a free estimate. We answer live, not a voicemail box, and we back the work with our written 90-Day Done Right Promise.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale, CA.

Need Construction help in Glendale? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch