Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Santa Monica, CA | Barrett & Sons Construction Glendale
We provide independent CGI construction service across Santa Monica, and the one thing that makes our work here different is this: on a coastal-regulated, mostly pre-1950 building stock, a CGI window or door is almost never a stand-alone job. It’s usually one piece of a retrofit, a re-stucco, or a Coastal Development Permit review. Barrett & Sons Construction Glendale installs and services CGI vinyl and aluminum-clad window and door assemblies across the 90401, 90406, 90407 and 90408 ZIPs. We’re an independent contractor, not affiliated with or authorized by the manufacturer. Call (844) 560-4526 for a free estimate.
Why Santa Monica Residents Choose Us for CGI Service
We know CGI product lines closely, and we know what a CGI frame has already been through when we open the wall around it. Santa Monica buildings sit close together on tight lots, many of them seventy to a hundred years old on pier-and-beam foundations, and the original electrical and plumbing inside those walls often turns up as an upgrade scope the moment a window opening gets opened. That’s the kind of surprise we plan for instead of discovering late.
Our technicians have up to 28 years of experience with fenestration and trim installations. We use OEM-compatible CGI sash, hardware and glazing wherever the unit is still serviceable, and quality aftermarket seals and rollers where the factory parts are discontinued or priced past sense. Every scope, allowance and price change goes in writing before any work starts, and every eligible job gets its permits pulled and its inspections signed. Ask a neighbor on your street, or look up the license number yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Santa Monica
- Salt-air corrosion of fasteners and hinge hardware. On coastal-facing elevations, the CGI frame holds up fine while the metal around it fails first. Hinges, screws and flashing interfaces pit and seize long before the vinyl or cladding shows wear.
- Marine-layer condensation and failed perimeter sealant. CGI vinyl units set into 1920s to 40s bungalow walls tend to show this as interior paint blistering, not a visible window defect. When the sealant at the perimeter lets go, moisture climbs into the sill and rots the framing behind the trim.
- Stucco-to-frame joint cracking. Assemblies installed without proper head flashing crack along that joint as Santa Ana wind-driven rain and thermal cycling work at the opening year after year.
- Fogged insulated glass units. Seals in older CGI units give out and the glass clouds from the inside. No amount of cleaning fixes it; the IGU needs replacing.
- Stiff or seized sliding door rollers. Common on CGI sliding patio doors in 1960s stucco apartment buildings where the original install predates current flashing practice, so the track is packed with grit and the rollers are done.
CGI Service in Santa Monica: What Local Conditions Mean for Your Equipment
Santa Monica’s mandatory seismic retrofit ordinance targets soft-story and cripple-wall apartment buildings, and that single fact reshapes how a CGI window or door replacement has to be sequenced. When a multifamily building goes into retrofit review, the fenestration scope frequently gets folded into the same permit file, so you can’t schedule the window replacement on its own calendar and expect it to stand apart. Structural work, stucco repair and the new CGI assembly have to be coordinated as one project, because pulling them apart creates inspection conflicts and rework. Near the bluff edge and the liquefaction-soil pockets around Palisades Park, foundation work can also require geotechnical review before anything above it gets permitted, and that review ripples back into how the openings are detailed. If you own a soft-story building on the numbered streets, plan the fenestration as part of the retrofit, not after it.
CGI Models & Products We Service in Santa Monica
We handle CGI vinyl single-hung and double-hung window series, the kind common in mid-century stucco apartments here. We also service CGI sliding patio door units on beach-adjacent condos and rear elevations, CGI aluminum-clad and vinyl-clad exterior trim and fascia profiles, and the multi-slide and fixed-panel window assemblies that show up in bungalow rear additions. Parts are sourced per job through distributor channels, so we don’t claim local stock. We use OEM CGI sash, hardware and glazing when the unit is serviceable and quality aftermarket seals, rollers and flashing when the factory equivalent is gone or overpriced. On a seventy-to-hundred-year-old coastal building, the honest call is often that one failed CGI unit is worth repairing, but a whole wall of them with corroded fasteners behind degrading stucco is a replace-and-reflash scope, not a parts swap. Call (844) 560-4526 to schedule your free estimate.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Santa Monica
What drives cost on a CGI job here is rarely the unit itself. It’s what’s behind it: corroded fasteners, failed flashing, rot at the sill, and whether the opening has to be re-detailed because the building is already in a retrofit scope. Larger projects together with CGI assemblies are quoted line by line, and any price change arrives as a written change order before work moves.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Roof Repair | $400 – $1,800 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate is free and written. Call (844) 560-4526 for an exact quote on your Santa Monica property.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Santa Monica
Often yes, or at minimum it needs to be coordinated with the retrofit permit rather than pulled on its own. When the building is in the mandatory retrofit review, fenestration changes get tied to the structural scope, so the two have to be sequenced together. Call (844) 560-4526 and we’ll walk through what your building’s permit file likely requires.
Because the marine layer, salt air and Santa Ana wind events attack the exposed metal first. Hinges, screws and flashing interfaces corrode and pit while the vinyl or cladding still looks sound, so the failure hides behind the frame until the sealant gives way. Call (844) 560-4526 for a free second opinion on any written estimate.
Window replacement in Santa Monica typically runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000. The spread comes down to how many openings are involved and how much flashing and stucco repair sits behind them. Call (844) 560-4526 for an exact quote; estimates are free.
Yes, if the unit is still serviceable. Fogged glass or seized rollers often come back with new OEM or quality aftermarket parts, and we reseal the perimeter. But if the fasteners and flashing behind the stucco have corroded through, the honest answer is replace-and-reflash. Call (844) 560-4526 to schedule a free estimate.
It adds a layer of review on top of standard LA County permitting, and it can affect what’s approved and how the assembly is detailed on coastal-facing elevations. That’s why we plan the review into the scope from the start rather than after the units arrive. Call (844) 560-4526 for a free estimate and we’ll sort out whether your project triggers it.
Service Areas Near Santa Monica
Barrett & Sons Construction Glendale handles CGI work throughout our Santa Monica service area and the surrounding region, including Glendale, Burbank, West Hollywood, Beverly Hills and San Fernando. We also cover Marina del Rey and Culver City, where the same salt air and retrofit scopes shape the work.
Book Your CGI Service in Santa Monica Today
Whether it’s a fogged unit, a sticking slider, or a window bank going in as part of a retrofit, we’ll give you a written scope and a straight answer. Call (844) 560-4526 to schedule your free estimate on your Santa Monica property. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Glendale.